Minicom SMARTRACK 116 IP, User Manual, Page: 73 / 92

Setting the Scan, Label, and Timeout
In the Time Settings window, you can

SCN
– the scan period

LBL
– the display period of the Confirmation label, showing which computer is
currently accessed

T/O
– the timeout period. When password protection is activated
automatically disable the Management keyboard, mouse
preset time of nonuse.
To set the above periods
1. Navigate to the desired column
2. Place the cursor over one of the three digits and type a new number
time period. Type a leading zero where necessary. For example, type
seconds. The numbers

In the
LBL
column
hides the label.

In the
T/O
column
causes the Timeout function

In the
SCN
column
000
causes the computer screen to be skipped
6.2.7
Configuring the Users
To configure the users settings:
1. In the OSD Settings window (see
line is on it, and press
The Users Settings window appears.
Operating the SmartRack 116 IP Switching System Locally
Figure 78 – Time Settings Window
Scan, Label, and Timeout Period
In the Time Settings window, you can set the following:
an period
the display period of the Confirmation label, showing which computer is
the timeout period. When password protection is activated, you can
automatically disable the Management keyboard, mouse, and screen after a
se.
set the above periods:
to the desired column and row.
Place the cursor over one of the three digits and type a new number
. Type a leading zero where necessary. For example, type
The numbers
000
and
999
are reserved, as follows:
column – Typing
999
displays the label continuously; t
– Typing
999
disables the Timeout function. Typing
Timeout function to work immediately.
column – Typing
999
displays the screen for 999 seconds. Typing
causes the computer screen to be skipped.
Configuring the Users Settings
To configure the users settings:
In the OSD Settings window (see Figure 75), navigate to
USERS
so that the red
line is on it, and press
Enter
.
The Users Settings window appears.
the SmartRack 116 IP Switching System Locally
Using the OSD
User Guide
|
73
the display period of the Confirmation label, showing which computer is
you can
and screen after a
Place the cursor over one of the three digits and type a new number for the new
. Type a leading zero where necessary. For example, type
040
for 40
; typing
000
disables the Timeout function. Typing
000
displays the screen for 999 seconds. Typing
so that the red