MIMAKI SIJ-320UV Operation Manual Download

Page: 8 / 124

Safety Precautions

vii

Precautions in Use

Handling the Anti-freezing liquid

• Use the exclusive Anti-freezing liquid by Mimaki ,or the

LED UV cooling device may be damaged.

• If the Anti-freezing liquid or mixed soft water with anti-

freezing liquid gets on the skin or clothes, immediately
wash it off with soap. If you get the Anti-freezing liquid
or  mixed  soft  water  with  anti-freezing  liquid  in  your
eyes, immediately wash your eyes with a lot of clean
water.  Then,  consult  a  doctor  as  soon  as  possible.If
high  temperature  Anti-freezing  liquid  or  mixed  soft
water  with  anti-freezing  liquid  gets  on  the  skin,
immediately  wash  it  off  with  soap  and  cool  with  iced
water. Then, consult a doctor as soon as possible.

• Before using the Anti-freezing liquid, be sure to read

the Material Safety Data Sheet (MSDS).

• If you swallowed the Anti-freezing liquid or mixed soft

water with antifreezing liquid accidentally, try to get to
vomit, and then consult a doctor as soon as possible.

• When unused the Anti-freezing liquid or used mixed

soft water with anti-freezing liquid should discard as
followings,

• Incinerating the fluid which is absorbed to the sawdust

or waste cloth.

• Entrust them to an industrial waste disposal contractor,

clarifying their contents.

• Avoid ignition such as static electricity and impact

spark.

• Be sure to wear goggles and gloves for handling the

Anti-freezing liquid.

WARNING

CAUTION

Handling of the power cable

• Use a power cable attached to this unit.
• Take care not to damage, break or work on the power

cable. If a heavy matter is placed on the power cable,
heated or drawn, the power cable can break to cause
fire or electric shocks.

• Connect to a socket-outlet with determinate polarity.

Power supply

• Leave the breaker turned ON.
• Do not turn off the main power switch on the right side

of this machine.

Heater

• Do not spill liquid on the pre-heater as this may cause

failure of the heater or firing.

• Do not touch pre-heater heaters with bare hand while it

is hot; otherwise, you can get burned.

Note on maintenance

• When cleaning the ink tank unit or the heads, make

sure to wear the attached gloves.

Handling of ink

• If you get ink in your eyes, immediately wash your

eyes with a lot of clean water for at least 15 minutes. In
doing so, also wash eyes to rinse ink away completely.
Then, consult a doctor as soon as possible.

• If anyone drinks ink by mistake, keep him or her quiet

and see a doctor immediately. Do not allow him or her
to swallow the vomit.

Then contact the emergency

number written in MSDS.

• If you inhale a lot of vapor and feel bad, immediately

move to a location of fresh air and then keep yourself
warm and quiet. Then, consult a doctor as soon as
possible.

• A part of the ingredients (photo polymerization initiator)

has toxicity against aquatic organisms. Please prevent
leakage flow to natural water systems (river, etc.) and
domestic sewages (toilet, road, etc.)

Grounding work

• This unit requires grounding work to prevent electrical

shock.

• Carry out the grounding work.

Wearing protective devices

• When cleaning the suction nozzle, which may scatter

ink, be sure to wear safety glasses and gloves, or ink
and washing liquid might enter your eyes or ink and
washing liquid put on your hands might make your
hands rough.

Handling the Anti-freezing liquid Power supply

• Be sure to store the Anti-freezing liquid in a cold and

dark place.

• Store the Anti-freezing liquid in a place that is out of

the reach of children.