MIMAKI SIJ-320UV Page 6 Operation Manual Download | Manualshive

Page: 6 / 124

background image

CAUTION

v

CAUTION

DISCLAIMER OF WARRANTY

THIS LIMITED WARRANTY OF MIMAKI SHALL BE THE
SOLE  AND  EXCLUSIVE  WARRANTY  AND  IS  IN  LIEU
OF  ALL  OTHER  WARRANTIES,  EXPRESS  OR
IMPLIED,  INCLUDING,  BUT  NOT  LIMITED  TO,  ANY
IMPLIED  WARRANTY  OF  MERCHANTABILITY  OR
FITNESS,  AND  MIMAKI  NEITHER  ASSUMES  NOR
AUTHORIZES  DEALER  TO  ASSUME  FOR  IT  ANY
OTHER  OBLIGATION  OR  LIABILITY  OR  MAKE  ANY
OTHER  WARRANTY  OR  MAKE  ANY  OTHER
WARRANTY  IN  CONNECTION  WITH  ANY  PRODUCT
WITHOUT MIMAKI’S PRIOR WRITTEN CONSENT.
IN  NO  EVENT  SHALL  MIMAKI  BE  LIABLE  FOR
SPECIAL,

INCIDENTAL

OR

CONSEQUENTIAL

DAMAGES OR FOR LOSS OF PROFITS OF DEALER
OR CUSTOMERS OF ANY PRODUCT.

Requests

• This Operation manual has been carefully prepared for

your easy understanding.
However, please do not hesitate to contact a distributor
in your district or our office if you have any inquiry.

• Description contained in this Operation manual are

subject to change without notice for improvement.

Interference to televisions and radios

The  product  described  in  this  manual  generates  high
frequency when operating.
The product can interfere with radios and televisions if set
up or commissioned under improper conditions.
The  product  is  not  guaranteed  against  any  damage  to
specific-purpose radio and televisions.
The product’s interference with your radio or television will
be  checked  by  turning  on/off  the  power  button  of  the
product.
In the event that the product is the cause of interference,
try to eliminate it by taking one of the following corrective
measures or taking some of them in combination.

• Change the orientation of the antenna of the television

set or radio to find a position without reception difficulty.

• Separate the television set or radio from this product.
• Plug the power cord of this product into an outlet which

is isolated from power circuits connected to the
television set or radio.

Foreword

Congratulations on your purchase of MIMAKI color ink jet
printer "SIJ-320UV" .
“SIJ-320UV” is a color inkjet printer that can print with UV
ink realizing high speed and high image quality.

About usable ink

Usable ink for this machine is Lus120 ink (four-color
model).

• 4-colors version:2 each of Cyan, Magenta, Yellow and

Black color ink bottle are use.

On This Operation manual

• This Operation manual is describing the operations

and maintenance of "Color inkjet printer SIJ

Series

"

(called as this machine hereafter)

• Read this Operation manual carefully and understand

them thoroughly to use.

• It is also necessary to keep this Operation manual on

hand.

• This Operation manual has been carefully prepared for

your easy understanding, however, please do not
hesitate to contact a distributor in your district or our
office if you have any inquiry.

• Descriptions contained in this Operation manual are

subject to change without any notice for improvement.

• You can also download the latest manual from our

website.

Reproduction of this manual is strictly prohibited.
All Rights Reserved.Copyright
© 2015 MIMAKI ENGINEERING Co., Ltd.

«
...
4
5
6
7
8
...
»

Summary of Contents for SIJ-320UV





























































































































Reviews:

No comments

Related manuals for SIJ-320UV

Power Defense PD3

Brand: Eaton Pages: 4

Brand: Javelin Pages: 2

Brand: Nanoptix Pages: 25

Brand: Nanoptix Pages: 4

EasyCoder 501 SA

Brand: UBI Pages: 214

Brand: UBI Pages: 64

Brand: Samsung Pages: 549

Brand: Lexmark Pages: 59

Tally Colour Laser T8006e

Brand: Tally Pages: 200

Brand: U-Line Pages: 18

Brand: Konica Minolta Pages: 8

Brand: Axis Pages: 66

Brand: Noztek Pages: 8

Brand: Gestetner Pages: 144

Brand: SINTERIT Pages: 16

Brand: 3D Systems Pages: 29

CraftBot PlusPro

Brand: CraftUnique Pages: 2

Brand: Lexmark Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands