![background image](http://html.mh-extra.com/html/miele/advanta-g-2170/advanta-g-2170_technical-information_234506199.webp)
Technical Information
199
G 1xxx/G 2xxx
Function Programming
Display
Save extras
Select
Save extras
.
Select a setting and
confirm with
OK
.
This function is activated in the
standard settings. In the display,
this is signaled with the message
On
. If you do not wish to save,
select
Off
.
Setting the temperature
format
Select
Temperature
.
Select a format and
confirm with
OK
.
The temperature can be displayed
in
°C
or
°F
as desired.
Activating/deactivating
the buzzer
Select
Buzzer
.
Select a setting and
confirm with
OK
.
The options
Off
,
Normal
and
Loud
are shown in the display.
Activating/deactivating
the confirmation tone
Select
Keypad tone
.
Select a setting and
confirm with
OK
.
Options:
On
(standard),
Off
.
Brightness adjustment
Select
Brightness
. Select
a setting using the
Dimmer
and
Brighter
buttons and confirm with
OK
.
The brightness of the display can
be set in 17 levels, with level 8 as
the standard setting. Brightness
levels are displayed in bar form.
Activating/deactivating
the memory
Select
Memory
. Select a
setting and confirm with
OK
.
Options:
On
(standard setting) and
Off
. The memory function saves the
last selected program.
Activating the dealer
demo mode
Select
Dealer
. Select a
setting and confirm with
OK
.
For options, see Section 080-
4.2.13.
Resetting standard
settings
Select
Factory default
.
To reset the parameters
(settings) modified by the
customer to their standard
settings, confirm with
OK
.
The display reads
Reset factory
default settings?
Adjusting the wash/final
rinse temperature
Select
Temperatures
.
Select
Main wash
or
Final
rinse
. Make a setting and
confirm with
OK
.
Options:
Normal
and
Increased
.
Increased wash temperature results
in a longer running time.
Water quantity
normal/increased
Select
Water plus
. Select
a setting; confirm with
OK
.
Options:
Normal
and
Increased
. If
Increased
is selected, water intake
increases by 16.7 fl.oz. (500mL).
Activating/deactivating
sensor softener, manually
setting water hardness
2
Select
Water hardness
.
Select a setting and
confirm with
OK
.
Automatic
= Sensor softener
activated. The water hardness at
the installation site can also be
manually set. Water hardness
range: 1°d to 70°d (1.1 to 74.9 gpg).
For information on external water
softeners, see Section 080-4.2.14.
Program running
time reduction
Select
Shorten the
program
. Make the
desired selection and
confirm with
OK
.
The display shows the options
On
and
Off
(standard setting).
Program-dependent running time is
reduced by reducing temperatures
and/or canceling holding times.
Summary of Contents for ADVANTA G 2170
