Miele ADVANTA G 2170, Technical Information

Page: 217 / 240

Technical Information
217
G 1xxx/G 2xxx
3. Release the C (clear) button when the display lights up.
4. Immediately press the C (clear) button 3 times; on the 3rd time, hold for
at least 4 seconds.
Acknowledgement indicator:
Successful accessing of the programming mode is indicated by the LEDs,
which are all off, and Service program , in the top line of the display.
The display always indicates three parameters at a time.
Use the cursor buttons to scroll through the display.
Options:
Function Programming Display
Check ID. no.
Select ID number. To
return to the main menu,
press
OK .
The display shows the ID numbers
of the BAE (selection-display
electronic) and SLT (control-power
electronic).
Fault memory display
Select Fault memory . To
return to the main menu,
press
OK .
The display shows the saved fault
codes. If multiple fault codes have
been registered, they are all shown.
Alternatively, the message
No fault
is displayed. See Table 080-2 for a
list of fault codes.
Fault code deletion
Select Fault memory .
Select Delete fault
memory? with the cursor
buttons; confirm with OK .
In the display, the option Delete
fault memory? is shown along with
the saved fault codes.
Component test
Select Component .
Components V01 - V17
are activated via the
cursor buttons. To return
to the main menu, press
C
(clear) .
The display lists the available
components and mini-programs
with wiring diagram abbreviations.
The relevant test program starts
after 2 s (see Section 080-2.2).
Operating hours check
Select Operating hours
with the cursor buttons. To
return to the main menu,
press
OK .
The display shows the number
of operating hours.
LED test
Select Operation . Select
B01: LED test . To return
to the main menu, press
C (Clear) .
All LEDs and the display light up.
Buzzer test
Select Operation . Select
B02: Buzzer test . To
return to the main menu,
press
C (Clear) .
Buzzer on.
Table 080-40: Service Mode Summary, G 2630/G 2670