![background image](http://html.mh-extra.com/html/miele/advanta-g-2170/advanta-g-2170_technical-information_234506180.webp)
Technical Information
180
G 1xxx/G 2xxx
Function Programming
Display
Second interim rinse (ID
nos. -984 and later)
Press the
GEL
button 26x.
The “GEL” LED flashes 2x
slowly and 6x quickly
intermittently. Press the
Program
button as
appropriate to make the
desired setting.
The display shows
p
and a digit
alternately. Setting options:
p0
=
Standard setting;
p1
= With second
interim rinse.
Extended drying time
Press the
GEL
button 27x.
The “GEL” LED flashes 2x
slowly and 7x quickly
intermittently. Press the
Program
button as
appropriate to make the
desired setting.
The display shows
p
and a digit
alternately. Setting options:
p0
=
Normal drying time;
p1
= Extended
drying time (+10 mins).
Appliance height setting
2
Press the
GEL
button 36x.
The “GEL” LED flashes 3x
slowly and 6x quickly
intermittently. Press the
Program
button as
appropriate to make the
desired setting.
The display shows
p
and a digit
alternately. Setting options:
p0
= Normal machine height (G
1xxx);
p1
= XXL model (G 2xxx).
Model setting
2
Press the
GEL
button 38x.
The “GEL” LED flashes 3x
slowly and 8x quickly
intermittently. Press the
Program
button as
appropriate to make the
desired setting.
The display shows
p
and a digit
alternately. Setting depends on
model and whether a circulation
pump with slide shutter (WAW) and
sensor softener (SEH) are installed.
p3
= G14xx, G24xx (w/out WAW,
w/SEH).
Country setting
2
Press the
GEL
button 39x.
The “GEL” LED flashes 3x
slowly and 9x quickly
intermittently. Press the
Program
button as
appropriate to make the
desired setting.
The display shows
p
and a digit
alternately. The following countries
can be set:
p1
= EUR (Europe);
p2
=
AUS (Australia);
p3
= USA;
p4
=
JPN (Japan);
p5
= I/E (Italy/Spain);
p6
= SER (Southern Europe).
3
Table 080-14:
Service Programming Mode, G 1470/G 2470
1
In machines with software version -876, run the update “Optimized cleaning of tea
residues in
Sensor Wash
program” (mat. no. 06471560). Modified threshold values will
improve the cleaning outcome.
2
If the electronic needs to be replaced during servicing, the following steps must be taken
during programming: In the first step, set the country specification and model, then switch
off the appliance. Repeat access and then set appliance width and height, and the
appropriate supply water hardness.
3
The SER country specification includes the following countries: Portugal, France, the
Netherlands, Belgium and Great Britain.
Save and quit:
Switch off the appliance.
Summary of Contents for ADVANTA G 2170
