Technical Information
166
G 1xxx/G 2xxx
4.2 Service
Programming
4.2.1
Inspira and Advanta - G 118x/G 2170/G 218x
Initial
requirements:
1. Open the door.
2. Switch off the appliance.
Accessing:
1. Press and hold the
Program
button.
2. Switch on the appliance.
3. Release the
Program
button.
4. Immediately press the
Program
button 5 times; on the 5th time, hold until
the "Rinse & Hold" LED flashes (5 flashes per second).
5. Release the
Program
button.
6. If the "Rinse & Hold" LED does not light up, repeat the procedure.
Options:
Function Programming
Display
Reset
Press the
Program
button
1x. To reset all parameters
to standard settings, press
and hold the
Program
button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program
button.
The "Intake/Drain" LED flashes 1x
rapidly. "SaniWash" LED is off:
values do not correspond to
standard settings; "SaniWash" LED
flashes: values correspond to
standard settings.
Water hardness setting
Briefly press
Program
2x.
To set the desired water
hardness, press and hold
the
Program
button until
the "Intake/Drain" LED
lights up. Then select the
desired value by briefly
pressing the
Program
button as appropriate.
The "Intake/Drain" LED flashes 2x
rapidly at intervals. The set value is
indicated by the "SaniWash" LED
flash pattern. If the "SaniWash" LED
flashes 4x rapidly at intervals, this
corresponds to the standard setting
of 12 - 15°d (12.8 - 16.1 gpg); see
Table 080-6.
2
Dispensed rinse aid
quantity setting
Briefly press
Program
3x.
To set the desired
quantity, press and hold
the
Program
button until
the "Intake/Drain" LED
lights up. Then select the
desired value by briefly
pressing the
Program
button as appropriate.
The "Intake/Drain" LED flashes 3x
rapidly at intervals. The set value is
indicated by the "SaniWash" LED
flash pattern. If this LED flashes 3x
rapidly at intervals, this corresponds
to the standard setting of 0.1 fl.oz.
(3mL). Range: 0 - 0.2 fl.oz. (0 - 6
mL); see Table 080-7.
Summary of Contents for ADVANTA G 2170
