![background image](http://html.mh-extra.com/html/miele/advanta-g-2170/advanta-g-2170_technical-information_234506219.webp)
Technical Information
219
G 1xxx/G 2xxx
4.3.11
LaPerla - G 283x/G 2872
Initial
requirements:
1. Close the door (open for G 2872).
2. Switch off the appliance.
Accessing:
1. Press and hold the
C (clear)
button.
2. Switch on the appliance.
3. Release the
C (clear)
button when the display lights up.
4. Immediately press the
C (clear)
button 3 times; on the 3rd time, hold for
at least 4 seconds.
Acknowledgement indicator:
The top line of the display shows
Service program
.
The display always indicates two or three parameters at a time, depending on model.
Options:
Function Programming
Display
Check ID. no.
Select ID number. To
return to the main menu,
press
OK
.
The display shows the ID numbers
of the BAE (selection-display) and
SLT (control-power) electronics.
Fault code display
Select
Fault memory
. To
return to the main menu,
press
OK
.
The display shows the saved fault
codes. If multiple fault codes have
been registered, they are all shown.
Alternatively, the message
No fault
is displayed. See Table 080-2 for a
list of fault codes.
Fault code deletion
Select
Fault memory
.
Select the option
Delete
fault memory?
with the
cursor buttons; confirm
with
OK
.
In the display, the option
Delete
fault memory?
is shown along with
the saved fault codes.
Component test
Select
Component
with
the cursor buttons.
Activation of the individual
components V01 - V18
takes place via the cursor
buttons. To return to the
main menu, press
C
(clear)
.
The display lists the available
components and mini-program with
wiring diagram/short description.
The relevant test program starts
after 2 s (see Section 080-2.2).
Operating hours check
Select
Operating hours
with the cursor buttons. To
return to the main menu,
press
OK
.
The display shows the total
operating hours.
LED test
Select
Operation
. Select
B01: LED test
. To return
to the main menu, press
C (Clear)
.
All LEDs and the display light up.
Buzzer test
Select
Operation
. Select
B02: Buzzer test
. To
return to the main menu,
press
C (Clear)
.
Buzzer on.
Table 080-42:
Service Mode Summary, G 283x/G 2872
Summary of Contents for ADVANTA G 2170
