![background image](http://html.mh-extra.com/html/miele/advanta-g-2170/advanta-g-2170_technical-information_234506168.webp)
Technical Information
168
G 1xxx/G 2xxx
Function Programming
Display
Activating/deactivating
improved drying
Press the
Program
button
27x. To make the desired
setting, press and hold the
Program
button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program
button.
The "Intake/Drain" LED flashes
2x slowly and 7x rapidly.
"SaniWash" LED is off: Standard
setting; "SaniWash" LED flashes:
Improved drying – depending on the
program, drying time is extended
and the final rinse temperature
increased.
Appliance width setting
1
Press the
Program
button
35x. To make the desired
setting, press and hold the
Program
button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program
button.
The "Intake/Drain" LED flashes 3x
slowly and 5x rapidly. "SaniWash"
LED is off: Appliance width 24”
(60cm) (standard setting);
"SaniWash" LED flashes: Appliance
width 18” (45cm).
Appliance height setting
1
Press the
Program
button
36x. To make the desired
setting, press and hold the
Program
button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program
button.
The "Intake/Drain" LED flashes 3x
slowly and 6x rapidly. "SaniWash"
LED is off: Standard appliance
height (G 1xxx); "SaniWash" LED
flashes: XXL models (G 2xxx).
Model setting
1
Press the
Program
button
38x. To make the desired
setting, press and hold the
Program
button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program
button.
The
"Intake/Drain" LED flashes 3x
slowly and 8x rapidly. "SaniWash"
LED off: Models without drying fan;
"SaniWash" LED flashes: Models
with UTT version 1 or 2.
3
Country setting
1
Press the
Program
button
39x. To make the desired
setting, press and hold the
Program
button until the
"Intake/Drain" LED lights
up. Then briefly press the
Program
button.
The "Intake/Drain" LED flashes 3x
slowly and 9x rapidly. The
"SaniWash" LED’s flash pattern
indicates which country is set: 1x:
Europe; 2x: Australia; 3x: USA; 4x:
Japan; 5x: Italy/Spain; 6x: Southern
Europe.
4
Table 080-5:
Service Programming Mode Summary, G 118x/G 2170/G 218x
1
If the electronic needs to be replaced during servicing, the following steps must be taken
during programming: In the first step, set the country specification and model, then switch
off the appliance. Repeat access and then set appliance width and height, and the
appropriate supply water hardness.
2
If the dishwasher is connected to an external ion exchanger water softener (i.e. that
needs to be regenerated with salt), the water hardness delivered by the system must be
set. If this value is unknown, set to 8°d (8.6 grains per gallon).
3
Circulation Turbothermic drying (UTT) version 1 (w/condenser), version 2 (w/out condenser).
4
The SER country specification includes the following countries: Portugal, France, the
Netherlands, Belgium and Great Britain.
Save and quit:
Switch off the appliance.
Summary of Contents for ADVANTA G 2170
