manualshive.com logo in svg

Miele ADVANTA G 2170, Technical Information

The Miele ADVANTA G 2170 user manual provides essential technical information and detailed instructions for operating your appliance effectively. Download this manual for free from our website manualshive.com, and discover all the features and functions of this outstanding product to ensure optimal performance and longevity.

Share
Download
background image

 
 

Technical Information 

 

 

185 

G 1xxx/G 2xxx

 

3. Release the 

Start/Stop

 button. 

4.  Immediately press the 

Start/Stop

 button 5 times; on the 5th time, hold 

until the "Start/Stop" LED flashes. 

5. Release the 

Start/Stop

 button. 

6.  If the "Start/Stop" LED does not light up, repeat the procedure. 

Acknowledgement indicator: 

 

The "Start/Stop" LED flashes rapidly (5 flashes per second). 

 

Options: 

For reset, water hardness and rinse aid settings, turn the selector switch to 
the position indicated in Table 080-18.  For all other settings, turn the selector 
switch to the 11 o’clock position. The setting will be indicated via the flashing 
rhythm of the "Rinse" LED.  See Table 080-18. 

Function Programming 

Display 

Reset 

 

Turn the selector switch to 
the 1 o'clock position. To 
reset all parameters to the 
delivery condition, press 
the 

Start/Stop

 button.

 

With this program function, all 
parameters can be reset to the 
delivery condition. The "Rinse" LED 
flashes 1x briefly intermittently. If 
the "Rinse" LED is off, at least one 
setting was modified. If the "Rinse" 
LED flashes, the parameters are as 
in the delivery condition.

 

Water hardness setting

 

Turn the selector switch to 
3 o'clock. To change the 
water hardness setting, 
press the 

Start/Stop

 

button.

 

Setting range: 1 - 70 °d (1 - 74.9 
gpg). If the "Rinse" LED flashes 4x, 
this corresponds to the standard 
setting of 12 - 15°d (12.8 - 16.1 gpg); 
see Table 080-19. 

 

Dispensed rinse aid 
quantity setting

 

Turn the selector switch to 
the 5 o'clock position. To 
change the dispensed 
rinse aid amount, press 
the 

Start/Stop

 button.

 

The set value is indicated by the 
"Rinse" LED flash pattern. If this LED 
flashes 3x rapidly at intervals, this 
corresponds to the standard setting 
of 0.1 fl.oz. (3 mL). Range: 0 - 0.2 
fl.oz. (0 - 6 mL); see Table 080-20. 

Resetting standard 
settings

 

Press the 

Start/Stop

 

button 1x.Turn the selector 
switch to 9 o'clock. To 
reset all parameters to the 
factory setting, press the 

Start/Stop

 button.

 

With this programming function, all 
parameters that can be modified by 
the customer can be reset to their 
factory settings. If the "Rinse" LED is 
off, at least one setting was 
modified. If the "Rinse" LED flashes, 
the parameters are as in the factory 
setting.

 

Adjust wash temperature

 

Press the 

Start/Stop

 

button 3x.Turn the selector 
switch to 3 o'clock. To 
change the temperature, 
press the 

Start/Stop

 

button. 

"Rinse" LED is off = wash 
temperature per factory setting; 
"Rinse" LED flashes = increased 
wash temperature. Increased wash 
temperature results in longer 
running time.

 

 

Summary of Contents for ADVANTA G 2170

















































































































































































































































Reviews:

No comments

Related manuals for ADVANTA G 2170

NEFF W543BX1GB User Manual And Installation Instructiions preview
W543BX1GB
Brand: NEFF Pages: 52
Hotpoint LTF 8M124 Operating Instructions Manual preview
LTF 8M124
Brand: Hotpoint Pages: 56
Matsui MF3WN Installation Manual preview
MF3WN
Brand: Matsui Pages: 8
Asko 20004 - Quick Start Manual preview
20004 -
Brand: Asko Pages: 16
M-system MVW 680 Instruction Book preview
MVW 680
Brand: M-system Pages: 21
Gaggenau DF481 Instruction Manual preview
DF481
Brand: Gaggenau Pages: 52
jobst ConturaMonoPLUS Fitting Instructions Manual preview
ConturaMonoPLUS
Brand: jobst Pages: 12
Gorenje WTD 63111 Instructions For Use Manual preview
WTD 63111
Brand: Gorenje Pages: 35
Cylinda DM3205E User Manual preview
DM3205E
Brand: Cylinda Pages: 46
Signature SDW8003EW NE User Manual preview
SDW8003EW NE
Brand: Signature Pages: 69
Heinner HDW-FS6006WE++ Manual preview
HDW-FS6006WE++
Brand: Heinner Pages: 58
NEFF S44E55 Instructions For Use Manual preview
S44E55
Brand: NEFF Pages: 31
Rangemaster RDW459FI/SF User Manual preview
RDW459FI/SF
Brand: Rangemaster Pages: 28
Krowne GWR-24 Installation And Operation Instruction Manual preview
GWR-24
Brand: Krowne Pages: 47
Kuppersberg WID 56149 G Technical Passport preview
WID 56149 G
Brand: Kuppersberg Pages: 96
Daewoo DWM-3600 Service Manual preview
DWM-3600
Brand: Daewoo Pages: 9
Electrolux AWT 7120 W User Manual preview
AWT 7120 W
Brand: Electrolux Pages: 20
Electrolux AQUALUX EW1006 F Instruction Booklet preview
AQUALUX EW1006 F
Brand: Electrolux Pages: 28

Brands by name

Popular brands

Load more brands