METREL MI 3290 Instruction Manual Download Page 32

Page: 32 / 162

MI 3290 Earth Analyser

General Settings

8.8

Auto Sequence® groups

The Auto Sequences

® in Earth Analyser can be organized in lists of Auto Sequences®. In a list, a

group of similar Auto Sequences

® is stored. The Auto Sequence® groups menu is intended to

manage with different lists of Auto Sequences

® that are stored on the microSD card.

8.8.1 Auto Sequence

® groups menu

In Auto Sequence

® groups menu, lists of Auto Sequences® are displayed. Only one list can be

opened in the instrument at the same time. The list selected in the Auto Sequence

® groups menu

will be opened in the Auto Sequence

® main menu.

Figure 8.9: Auto Sequence

® groups menu

8.8.2 Operations in Auto Sequence

® groups menu:

Options

Opens the selected list of Auto Sequence

s®. Previously selected list of Auto

Sequence

s® will be closed automatically.

Refer to chapter

8.8.3 Selecting a list of Auto Sequence

s®

for more information.

Deletes the selected list of Auto Sequence

s®.

Refer to chapter

8.8.4 Deleting a list of Auto Sequence

s®

for more information.

Opens options in control panel / expands column.

Summary of Contents for MI 3290



































































































































































Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands

METREL MI 3290, Instruction Manual

Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands