METREL MI 3290 Instruction Manual Download Page 118

Page: 118 / 162

MI 3290 Earth Analyser

Auto Sequences

118

Auto Sequences®

Pre-programmed sequences of measurements can be carried out in Auto Sequence

® menu. The

sequence of measurements, their parameters and flow of the sequence can be programmed. The
results of an Auto Sequence

® can be stored in the memory together with all related information.

Auto Sequence

® can be pre-programmed on PC with the Metrel ES Manager software and

uploaded to the instrument. On the instrument parameters and limits of individual single test in the
Auto Sequence can be changed / set.

12.1 Selection of

Auto Sequence®

The Auto Sequence

® list from Auto Sequence® groups menu should be selected first. Refer to

chapter

8.8

Auto Sequence® groups

for more details. The Auto Sequence

® to be carried out can

then be selected from the Main Auto Sequence

® menu. This menu can be organized in structural

manner with folders, sub-folders and Auto Sequences

®.

Figure 12.1: Main Auto Sequence

® menu

Options

Enters menu for more detail view of selected Auto Sequence

®.

This option should also be used if the parameters / limits of the selected
Auto Sequence

® have to be changed. Refer to chapter

12.2.1 Auto

Sequence

® view menu

for more information.

Starts the selected Auto Sequence

®.

The instrument immediately starts the Auto Sequence

®.

Summary of Contents for MI 3290



































































































































































Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands

METREL MI 3290, Instruction Manual

Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands