METREL MI 3290 Instruction Manual Download Page 47

Page: 47 / 162

MI 3290 Earth Analyser

Memory Organizer

9.1.4.2 Operations on Structure items

The structure item must be selected first.

Figure 9.4: A structure project is selected in the Tree menu

Options

Starts a new measurement.
Type of measurement (Single test or Auto Sequence

®) should be selected first. After

proper type is selected, the instrument goes to Single Test or Auto Sequence

selection screen. Refer to chapters

10.1 Selection modes.

Saves a measurement.
Saving of measurement under the selected Structure project.

View / edit parameters and attachments.
Parameters and attachments of the Structure items can be viewed or edited.
Refer to chapter

9.1.4.3 View / Edit parameters and attachments of a Structure

for more information.

Adds a new measurement.
The instrument goes to the menu for adding measurement into structure. Refer to
chapter

9.1.4.5 Add a new measurement

for more information.

Adds a new Structure item.
A new Structure item can be added. Refer to chapter

9.1.4.4 Add a new Structure

item

for more information.

Comments.
Comment is displayed.

Attachments.
Name and link of attachment is displayed.

Clones a Structure.
Selected Structure can be copied to same level in structure tree (clone). Refer to
chapter

9.1.4.6 Clone a Structure item

for more information.

Copies & Paste a Structure.
Selected Structure can be copied and pasted to any allowed location in structure
tree. Multiple “Paste” is allowed. Refer to chapter

9.1.4.8 Copy & Paste a Structure

item

for more information.

Deletes a Structure item.
Selected Structure item and sub-items can be deleted. User is asked for confirmation
before the deleting. Refer to chapter

9.1.4.11 Delete a Structure item

for more

information.

Summary of Contents for MI 3290



































































































































































Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands

METREL MI 3290, Instruction Manual

Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands