METREL MI 3290 Instruction Manual Download Page 52

Page: 52 / 162

MI 3290 Earth Analyser

Memory Organizer

9.1.4.7 Clone a measurement

By using this function a selected empty or finished measurement can be copied (cloned) as an
empty measurement to the same level in the structure tree.

Procedure



Select the measurement to be cloned.



Select Clone in Control panel.



A new empty measurement is displayed.

9.1.4.8 Copy & Paste a Structure item

In this menu selected Structure item can be copied and pasted to any allowed location in the
structure tree.

Procedure



Select the structure item to be copied.



Select Copy in control panel.



Select location where structure item should
be copied.



Select Paste in Control panel.

Summary of Contents for MI 3290



































































































































































Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands

METREL MI 3290, Instruction Manual

Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands