METREL MI 3290 Instruction Manual Download Page 54

Page: 54 / 162

MI 3290 Earth Analyser

Memory Organizer

9.1.4.10 Copy & Paste a measurement

In this menu selected measurement can be copied to any allowed location in the structure tree.

Procedure



Select the measurement to be copied.



Select Copy in Control panel.



Select the location where measurement
should be pasted.



Select Paste in Control panel.



A new (empty) measurement is displayed in
selected Structure item.

Note:



The Paste command can be executed
one or more times.

9.1.4.11 Delete a Structure item

In this menu selected Structure item can be deleted.

Procedure



Select the structure item to be deleted.



Select Delete in Control panel.

Summary of Contents for MI 3290



































































































































































Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands

METREL MI 3290, Instruction Manual

Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands