MI 3290 Earth Analyser
Auto Sequences
®
121
12.2.2 Step by step executions of Auto Sequence
®
While the Auto Sequence
® is running, it is controlled by pre-programmed flow commands.
Examples of actions controlled by flow commands are:
pauses during the test sequence
buzzer
proceeding of test sequence in regard to measured results
The actual list of flow commands is available in
Appendix VII Description of flow commands.
Figure 12.4: Auto Sequence
® – example of a pause with message (text or picture)
Figure 12.5: Auto Sequence
® – example of a finished measurement with options for proceeding
Options
(during execution of an Auto Sequence
®)
Proceeds to next step in the test sequence.
Repeats the measurement.
Displayed result of a single test will not be stored.
Ends the Auto Sequence
® and goes to Auto Sequence® result screen.
Exits the loop of single tests and proceeds to the next step in the test
sequence.
The offered options in the control panel depend on the selected single test, its result and the
programmed test flow.
