METREL MI 3290 Instruction Manual Download Page 22

Page: 22 / 162

MI 3290 Earth Analyser

Instrument operation

6.4 Display and sound

6.4.1 Battery and time indication

The battery indication indicates the charge condition of battery and connection of external charger.

Battery capacity indication.

Low battery. Recharge the battery cells.

Battery is full.

Battery fault indication.

Charging in progress (if power supply adapter is connected and battery
inserted).

Time indication (hh:mm).

6.4.2 Messages

In the message field warnings and messages are displayed.

Conditions on the input terminals allow starting the measurement; consider
other displayed warnings and messages.

Conditions on the input terminals do not allow starting the measurement,
consider displayed warnings and messages.

Run selected step of a measurement. (Potential)

Proceeds to next step.

Repeats the measurement.
Displayed result of a single test will not be stored.

Stop the measurement.

Result(s) can be stored.

Opens menu for changing parameters and limits.

Summary of Contents for MI 3290



































































































































































Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands

METREL MI 3290, Instruction Manual

Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands