MI 3290 Earth Analyser
Tests and Measurements
88
Figure 11.39: Example of
Passive (Flex Clamps)
measurement result - Z
tot
Figure 11.40: Example of
Passive (Flex Clamps)
measurement result
– Z
sel1-4
Notes:
Consider displayed warnings when starting the measurement!
High noise currents and voltages in earth could influence the measurement results. The
tester displays the
“noise” warning in this case.
Note (Probe):
Probes must be placed at a sufficient distance from the measured object.
Notes (Flex):
When using only one, two or three flex clamps, always connect one clamp to F1
terminal (synchronization port).
Make sure that the arrow marked on the clamp coupling points toward the correct
orientation for correct phase measurement.
Make sure that the number of turns is correctly entered in the test parameters window.
