METREL MI 3290 Instruction Manual Download Page 35

Page: 35 / 162

MI 3290 Earth Analyser

General Settings

8.9.3 Operations with Workspaces

Only one Workspace can be opened in the instrument at the same time. The Workspace selected
in the Workspace Manager will be opened in the Memory Organizer.

Figure 8.11: Workspaces menu

Options

Marks the opened Workspace in Memory Organizer.
Opens the selected Workspace in Memory Organizer.
Refer to chapter

8.9.6 Opening a Workspace

for more information.

Deletes the selected Workspace.
Refer to chapter

8.9.7 Deleting a Workspace / Export

for more information.

Adds a new Workspace.
Refer to chapter

8.9.5 Adding a new Workspace

for more information.

Exports a Workspace to an Export.
Refer to

8.9.9 Exporting a Workspace

for more information.

8.9.4 Operations with Exports

Figure 8.12: Workspace manager Exports menu

Options

Deletes the selected Export.
Refer to chapter

8.9.7 Deleting a Workspace / Export

for more information.

Imports a new Workspace from Export.
Refer to

8.9.8 Importing a Workspace

for more information.

Summary of Contents for MI 3290



































































































































































Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands

METREL MI 3290, Instruction Manual

Search results

Summary of Contents for MI 3290

Reviews:

Related manuals for MI 3290

Brands by name

Popular brands