MB Connect Line mbNET.rokey RKH 210, Manual

Page: 28 / 324

13 Display, controls and connectors
13.1 Front view of the device
1. Function / status LEDs
2. WAN interface
3. LAN interfaces 1 – 4 (4 port switch)
4. USB Host 2.0
5. Dial Out button
6. Reset button
7. Serial interface COM
8. Coding switch hexadecimal (Function in prepa-
ration)
8.a Function / status LEDs for coding switch
9. Key switch
9.a Function / status LEDs for key switch
9.b Key (red) for switch positions
OFF, ONL, RST *, REM
9.c Key (black) for switch positions
OFF, ONL
* The switch position RST has just a tactile function.
Function / Status LEDs
LED LED
colour
LED
status
Description
Fc1 orange flashes
•
Together with Fc2 if a portal configuration has been detected via the USB in-
terface.
•
Together with Fc3 if a firmware has been detected via the USB interface.
off No data traffic on COM2 - incoming
flashes Data traffic on COM2 - incoming
•
Together with Fc1 if a portal configuration has been detected via the USB in-
terface.
orange
on For MPI: Bus communication OK
off No data traffic on COM2 - outgoing
Fc2
green
flashes Data traffic on COM2 - outgoing
For MPI: Data traffic on the bus
Page 28 von 324 | V 7.2.0 - en | Aug 25 th , 2022 |