MB Connect Line mbNET.rokey RKH 210, Manual

Page: 227 / 324

Designation Description
Active Check box for enabling/disabling this function.
Connection name In the text box, enter a name for the connection.
Connection type Selection field for the connection type
•
Router - Router connection
•
Client router connection
Link connection Selection field for when or under which conditions the connection should be started.
- Connect while enable Key Switch position "Online (ONL)"
- Wait for incoming connection
N O T I C E
If one of the active connection options was selected to establish the connection, then this mbNET is in "client
mode" and will be referred to as "client" in the further documentation.
The mbNET on the other side is in "waiting position".
N O T I C E
One of the routers must be in "wait mode"!
Designation Description
Remote mainte-
nance active on You can only choose from::
- Key switch (REM)
N O T I C E
The Link connection and Remote maintenance active on functions are part of the concept of 2-level
security.
A description of the 2-level security can be found after this table.
Peer addresse (IP,
DNS) Here, in the case of the OpenVPN client, the public IP address or DynDNS name (ex-
ample: 0987654321@mbnet.mymbnet.biz) of the OpenVPN server must be entered.
Disconnect con-
nection after inac-
tivity [s] Enter the time after which an existing connection is terminated if no data packets are
transmitted during this time. If nothing is entered, or if the entry is "0", the connection
remains.
Click the Next button to continue the configuration.
VPN | Page 227 of 324