MB Connect Line mbNET.rokey RKH 210, Manual

Page: 70 / 324

23.3.6 System > Settings > System Service
Designation Description
Disable network config-
uration (Conftool) Check box for enabling/disabling this function.
N O T I C E
The "Disable Network Configuration (Conftool)" function is only relevant if you operate the router on the
portal mbCONNECT24. This function is described in the mbCONNECT24 online help.
SimplyConnect (SC3)
service enable Check box for enabling/disabling this function.
N O T I C E
The "SimplyConnect (SC3) Activate Service" function is only relevant if you operate the router in the mb-
CONNECT24 portal.
You can find information about SimplyConnect on our website at
www.mbconnectline.com or at https://
simply-connect.me .
Enable manufacturer
system access Check box for enabling/disabling this function.
N O T I C E
Enable this function in a support case when you want to allow the device manufacturer to access the
mbNET via SSH. The activation starts the SSH server for the ROOT access to the mbNET, which is handled
via PKI.
Clicking on "Save” temporarily saves the current entries/changes.
But the changes are not yet enabled.
Clicking on "Close” discards the current input/changes.
Page 70 von 324 | V 7.2.0 - en | Aug 25 th , 2022 |