MB Connect Line mbNET.rokey RKH 210, Manual

Page: 99 / 324

automatic Firmware version check and update
After activating this function, the actuality of the installed firmware is checked every 24 hours.
If a newer version is available on the Autoupdate server, it will be automatically installed.
N O T I C E
An automatic update will only take place if "Autoupdate server" was selected when selecting the upgrade
method.
The used firmware version status (stable or beta) depends on the previously made selection.
Clicking on "Save” temporarily saves the current entries/changes.
But the changes are not yet enabled.
Clicking on "Close” discards the current input/changes.
N O T I C E
Temporary stored settings/changes are saved until a reboot of the router.
Only after you confirm via “Apply Changes", will the changes be applied (activated) and stored permanently.
24 Network - connection settings and options
Here, you define the connection settings for your mbNET-type.
System - settings and basic router configuration | Page 99 of 324