MB Connect Line mbNET.rokey RKH 210 Manual Download Page 275

Page: 275 / 324

30.2.4.1.2

Link to Dashboard (Node-RED)

By clicking on the "Dashboard" button you will be redirected to Node-Red-Flows.

A new browser window, with a login, will open.

The access data for this are:

a. User name and password for the user you created in the user management for accessing Node-Red

b. the current user data for the administrator (device access data)

standard user name = admin
standard password = the device password of the mbNET (see label on the back of the mbNET)

Extras | Page 275

of 324

Summary of Contents for mbNET.rokey RKH 210





































































































































































































































































































































Search results

Summary of Contents for mbNET.rokey RKH 210

Reviews:

Related manuals for mbNET.rokey RKH 210

Brands by name

Popular brands

MB Connect Line mbNET.rokey RKH 210, Manual

Search results

Summary of Contents for mbNET.rokey RKH 210

Reviews:

Related manuals for mbNET.rokey RKH 210

Brands by name

Popular brands