MB Connect Line mbNET.rokey RKH 210, Manual

Page: 30 / 324

Interfaces
Designation Status Description
WAN – WAN port on the router (customer network, DSL modem,...)
green flashes Network connection available
WAN LED
orange flashes Network traffic active
LAN 1 - 4 – Local network connection (e.g. machine network)
green flashes Network connection available LAN-LED
1 – 4
(Dual LED)
orange flashes Network traffic active
USB – Connection for USB stick
COM –
COM2 port for connecting devices with RS232/RS485, RS422 interface, or depend-
ing on the router type, devices with MPI /PROFIBUS interface.
Button
Designation Description
Dial out
This button is required if a portal configuration or a firmware is to be transferred to the mbNET via the
USB interface.
Reset After pressing the button, the router is restarted (cold start).
Coding switch hexadecimal
N O T I C E
Function in preparation.
Key switch with two keys, for switching different functions.
Switch
position
Key color LED status
"Operation"
Function
RST red red Loading the factory settings
OFF red / black green It is not possible to establish a VPN connection.
Modem devices cannot connect to the Internet.
ONL red / black green It can be established a VPN connection from the mbNET to mbCON-
NECT24.
With modem devices an Internet connection can be established.
= Data Logging
REM red red It can be established a VPN connection from the mbNET to mbCON-
NECT24 including routing to the LAN side of the router.
With modem devices an Internet connection can be established including
routing to the LAN side of the router.
= VPN connection with routes
= Data logging
= Remote Maintenance
Page 30 von 324 | V 7.2.0 - en | Aug 25 th , 2022 |