MB Connect Line mbNET.rokey RKH 210, Manual

Page: 179 / 324

26.4 Security Settings > Forwarding
Forwarding is used to forward requests from specific IP addresses and ports to IP addresses and ports defined
in turn.
Click on the green plus , to add a rule.
Designation Description
Active Check box for enabling/disabling this function.
Origin IP Here you can enter the IP addresses from which data packets are received. If there is
an entry here, only packets from these addresses are forwarded.
Acceptable input: IP address or netmask or List of IP addresses or Range of IP ad-
dresses [e.g. 192.168.0.100-192.168.0.200] or empty
Origin Port Here you can specify the ports through which data packets are received. Here is an en-
try, then only packets specifically sent via these ports are forwarded.
Acceptable input: Integer or empty
Security settings | Page 179 of 324