MB Connect Line mbNET.rokey RKH 210, Manual

Page: 120 / 324

Designation Description
Dialin enable Check box for enabling/disabling this function.
If the checkbox is enabled, access to the router (mbNET) is approved by a client
computer.
PPP Server IP-Address
(here) Enter the address of the router (mbNET) here.
You can use the same network domain as the local network. However, you
should avoid using an existing address, as this can lead to an address conflict.
PPP Client IP address Here, Enter the IP address that the router assigns the client (calling remote ter-
minal) when a PPP connection is established.
The router and the other remote terminal form their own network after the con-
nection.
Authentication via PAP Check box for enabling/disabling this function.
Accept the factory default setting. PAP is an authentication type. Use the same
setting as the dialling partner.
If PAP is disabled, this authentication will not be accepted, and your data can be
read by others.
Authentication using
CHAP Check box for enabling/disabling this function.
Accept the factory default setting. CHAP is an authentication type. Use the
same setting as the dialling partner.
Disabling CHAP has the consequence that this authentication will not be ac-
cepted and your data can be read by others.
Disconnect connection
after [s] inactivity Enter the time after which an existing connection is terminated if no data pack-
ets are transmitted during this time.
If nothing is entered, or if the entry is "0", the connection remains active.
Dial-in authentication Drop-down menu:
•
Only the following user
Only the user registered in the following input fields is entitled to dial in to
the router (mbNET).
•
Any user with dial-in rights
Every user who has been activated in the User Management > User (sys-
tem) for a "modem dial-up", is entitled to establish a connection.
User name Enter the username for the PPP dial-in.
Password Enter the associated password for the PPP dial-in.
Page 120 von 324 | V 7.2.0 - en | Aug 25 th , 2022 |