MB Connect Line mbNET.rokey RKH 210, Manual

Page: 29 / 324

LED LED
colour
LED
status
Description
off GSM devices: no reception orange
flashes GSM devices: Blink frequency 1 Hz == 20 % – 50 % reception quality
•
Together with Fc1 if a firmware has been detected via the USB interface.
off GSM devices: Reception quality display depends on Fc4
Fc3
green
on GSM devices: Fc3 green + Fc4 green: 71 % – 100 % reception quality
off GSM devices: no reception orange
flashes GSM devices: Fc4 Fc3 orange): 1Hz == 51 % – 70 % reception quality
off GSM devices: Reception quality display depends on Fc3
Fc4
on GSM devices: Fc4 green + Fc3 green: 71 % – 100 % reception quality
green
flashes During the activation phase of mbEDGE the LED Fc4 flashes at a frequency of 3 Hz
(fast).
After completion of activation at a frequency of 1.5 Hz (slow).
off Waiting for bootloader or signature successfully tested orange
on Checks signature, loads kernel
off Waiting for kernel
flashes System loading rootFs
Rdy
green
on Boot process complete, the device can be used.
off No VPN connection started
on Internet connection is estab VPN connection is started
orange
flashes Blink frequency 1.5 Hz: VPN connection is established
off No Internet connection
flashes Blink frequency 3 Hz: Internet connection is started
Con
green
on Internet connection is established
Pwr green off The power supply to the router is interrupted/the router is not connected to the pow-
er supply.
green on The power supply is connected to the terminal box and switched on.
flashes Error in memory red
on Error found
The error type can be viewed on the WebGUI of the mbNET under
System> Info> "Last error message".
Stat
green on In conjunction with the mbCONENCT24 portal: User is connected to the device.
green on For key switch position: OFF / ONL Operation
red on For key switch position: RST / REM
User 1 - - Currently without function.
User 2 - - Currently without function.
Display, controls and connectors | Page 29 of 324