MB Connect Line mbNET.rokey RKH 210, Manual

Page: 73 / 324

23.4.1 System > Web > HTTPS access for device configuration
Designation Description
HTTPS Port Here you can change the default port (443), through which the HTTPS server is ac-
cessed.
Important! If you change the default ports, you must specify the new port in the
browser's address bar (e.g.:192.168.0.100:84).
Upload own certificate Select your certificate using the Browse button button.
Upload own key for
certificate Use the Browse button to select your key for the selected certificate.
Import The selected files are uploaded by clicking the "Import" button.
N O T I C E
ATTENTION! If you upload a wrong certificate or key it could be possible that the webpage is no more
reachable!
Clicking on "Save” temporarily saves the current entries/changes.
But the changes are not yet enabled.
Clicking on "Close” discards the current input/changes.
N O T I C E
Temporary stored settings/changes are saved until a reboot of the router.
Only after you confirm via “Apply Changes", will the changes be applied (activated) and stored permanently.
System - settings and basic router configuration | Page 73 of 324