MB Connect Line mbNET.rokey RKH 210 Manual Download Page 98

Page: 98 / 324

Firmware update

Designation

Description

Upgrade Method

Selection field with the following options:

•

Auto Update Server
=> this requires an internet connection to be established.

•

USB stick
=> this requires that a USB stick with the new firmware - in the root directory - is
connected to mbNET.

•

Network
=> for this, the mbNET must be accessible on the LAN side.

Firmware Version
Status

Selection field for the firmware status

•

Firmware Status: Stable

•

Firmware Status: Beta

Available firmware
version

After selecting Upgrade Method and Firmware Version Status, the available
firmware version is displayed here.

By clicking on the information symbol

the firmware changelogs are displayed.

Click on the Start button to perform the firmware update and follow the instructions
(for example, perform a device reboot).

Page 98

von 324 | V 7.2.0 - en | Aug 25

, 2022 |

Summary of Contents for mbNET.rokey RKH 210





































































































































































































































































































































Search results

Summary of Contents for mbNET.rokey RKH 210

Reviews:

Related manuals for mbNET.rokey RKH 210

Brands by name

Popular brands

MB Connect Line mbNET.rokey RKH 210, Manual

Search results

Summary of Contents for mbNET.rokey RKH 210

Reviews:

Related manuals for mbNET.rokey RKH 210

Brands by name

Popular brands