MB Connect Line mbNET.rokey RKH 210, Manual

Page: 184 / 324

26.5 Security settings > NAT
26.5.1 SimpleNAT
"SimpleNAT” allows you to grant access to an IP address from the LAN Network 1:1 in the WAN Ethernet
network. To do this, a free WAN Ethernet address from the WAN network is registered as WAN IP. This IP
address is then added to the WAN interface and directly “natted” to the registered LAN IP address" mapped
1:1. i.e. the LAN IP address can be accessed directly from the IP address of the WAN. This has the advantage
that no ports etc. need to "forward".
Click on the green plus , to add a rule.
Designation Description
Active Check box for enabling/disabling this function.
WAN IP address Enter here a free WAN Ethernet address from the WAN network.
LAN IP address Enter here the LAN IP address that you want to make accessible.
Comments Here you can enter a comment for this rule.
Page 184 von 324 | V 7.2.0 - en | Aug 25 th , 2022 |