MB Connect Line mbNET.rokey RKH 210, Manual

Page: 161 / 324

25.2 COM network settings
Designation Description
Protocol Select the appropriate driver for your connected devices.
Port Enter the port for the network or Internet communications. The port can be chosen
freely, but it must match the settings in the VCOMLAN2.
Enable ports in
the firewall The checkbox must be enabled so that you can communicate via the specified port.
Otherwise, all signals/packages are blocked/discarded.
This rule is only applicable when you access the serial interfaces using the public ad-
dress.
If there is an existing VPN connection you communicate via the local network ad-
dress.
Lock service Check box for enabling/disabling this function.
If this function is enabled, the serial driver to communicate between mb-
DIALUP/VCOM-LAN and serial port is not started.
Clicking on "Save” temporarily saves the current entries/changes.
But the changes are not yet enabled.
Clicking on "Close” discards the current input/changes.
N O T I C E
Temporary stored settings/changes are saved until a reboot of the router.
Only after you confirm via “Apply Changes", will the changes be applied (activated) and stored permanently.
25.3 COM2 in the MPI/PROFIBUS version
Communication with the S7 via
Serial (serial port COM) | Page 161 of 324