MARUTI SUZUKI Ertiga Tour M Owner'S Manual Download Page 81

Page: 81 / 238

2-46

BEFORE DRIVING

72RH0-74E

Electric Power Steering Light

79J039

When the ignition switch is turned “ON”,

this light comes on. When the engine is

started, the light goes out.
If this light comes on while driving, the

power steering system may not work prop-

erly. Have the system inspected by a

Maruti Suzuki authorised workshop.

NOTE:

The following steering wheel operations

may gradually take more effort while park-

ing or driving at a very low speed. This is

not a malfunction of the steering system,

but the power steering control system lim-

its the power assist in order to prevent it

from overheating.

• The steering wheel is operated very

often.

• The steering wheel is kept in a fully

turned position for a long while.

When the power steering control system

cool down, the power steering system will

return to its original condition.

However, repeating these operations could

cause damage to the power steering sys-

tem.

• This light comes on when continuing

period of time of limiting the power assist

in order to prevent from overheating.

NOTE:

If the power steering system does not work

properly, it will require greater effort to

steer, but you still will be able to steer.

NOTE:

If the steering is operated, you may hear

noise caused by electric power steering

operation. This is normal and indicates that

the power steering system works properly.

Turn Signal Indicators

50G055

When you turn on the left or right turn sig-

nals, the corresponding green arrow on the

instrument panel will blink along with the

respective turn signal lights. When you

turn on the hazard warning switch, both

arrows will blink along with all of the turn

signal lights.

Illumination Indicator Light

64J045

This indicator light comes on while the

position lights, tail light and/or the head-

lights are on.

Engine Coolant Temperature Light

(if equipped)

54G344

When the ignition switch is turned “ON”,

this light comes on briefly so you can

check that the light is working.
This indicator has the following two func-

tions.

Summary of Contents for Ertiga Tour M















































































































































































































































Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands