manualshive.com logo in svg

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

The MARUTI SUZUKI Ertiga Tour M Owner's Manual is the essential guide to maximize your experience with this multi-purpose vehicle. Easily download the manual for free from our website to access comprehensive information on its features, maintenance, and operation, ensuring a hassle-free ownership experience.

Share
Download
background image

5-12

OTHER CONTROLS AND EQUIPMENT

72RH0-74E

Adjusting bass/treble/balance /fader

The preset EQ can set various types of

sounds depending on the type of music.

1) Touch or slide the “TUNE/TRACK” Up/

Down button (2) from the “Sound”

screen, select “Bass”, “Treble”, “Bal-

ance”, or “Fader” and touch the “ENT”

button (3).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (2), adjust to the desired

settings and touch the “ENT” button (3).

• “Bass”/“Treble”:

– Can be adjusted in stages from -6 to 0

to +6.

– Touch 

 to emphasize the low or high

sounds, and touch 

 to quiet.

• “Balance”:

– Can be adjusted in 9 stages left   to

right .

– Touch 

 to emphasize the right

speaker, and touch 

 to emphasize

the left speaker.

• “Fader”:

– Can be adjusted in 9 stages back to

front.

– Touch 

 to emphasize the front

speaker, and touch 

 to emphasize

the rear speaker.

Adjusting the AVC (Auto volume con-

trol)

The Auto Volume Control (AVC) function

automatically adjusts (increases/

decreases) the sound volume in accor-

dance with vehicle speed. The AVC control

is provided with three selectable levels

(LEVEL OFF, 1, 2, 3). The range of volume

adjustment increases together with the

LEVEL number.
1) Touch or slide the “TUNE/TRACK” Up/

Down button (2) from the “Sound”

screen, select “AVC”, and touch the

“ENT” button (3).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (2), select the desired

level, and touch the “ENT” button (3).

• The AVC will change as follows:

Off 

↔

 Level 1 

↔

 Level 2 

↔

 Level 3

Switching the mode

1) Press the “MEDIA” button (7) for 1 sec-

ond or more in radio mode. You can

switch the radio mode to media mode.

2) Touch the “RADIO” button (8) in media

mode. You can switch the media mode

to radio mode.

System settings

Change the “Beep”, “Slide”, and “SW Sen-

sitivity” settings.

1) Touch the “SETUP” button (5).

• Touch for 1 second or longer when using

radio mode.

2) Touch or slide the “TUNE/TRACK” Up/

Down button (2), select “System”, and

touch the “ENT” button (3).

• The system setting screen will be dis-

played.

3) Touch or slide the “TUNE/TRACK” Up/

Down button (2), select the desired

item, and touch the “ENT” button (3).

• The system settings will change as fol-

lows:

Beep 

↔

 Slide 

↔

 SW Sensitivity

BEEP on/off

1) Touch or slide the “TUNE/TRACK” Up/

Down button (2) from the “System”

screen, select “Beep”, and touch the

“ENT” button (3).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (2), select on or off, and

touch the “ENT” button (3).

Slide touch operation settings

Turn the slide operation on/off.

1) Touch or slide the “TUNE/TRACK” Up/

Down button (2) from the “System”

screen, select “Slide”, and touch the

“ENT” button (3).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (2), select on or off, and

touch the “ENT” button (3).

Summary of Contents for Ertiga Tour M















































































































































































































































Reviews:

No comments

Related manuals for Ertiga Tour M

Abarth 595 Owner'S Handbook Manual preview
595
Brand: Abarth Pages: 176
Parrot CK 3000 Evolution Specifications preview
CK 3000 Evolution
Brand: Parrot Pages: 2
RACLET SAFARI Setup And Maintenance Manual preview
SAFARI
Brand: RACLET Pages: 48
RACLET Allegra Manual preview
Allegra
Brand: RACLET Pages: 31
FVC Sprinter Bed System Adventure Wagon Kit Installation Manual preview
Sprinter Bed System Adventure Wagon Kit
Brand: FVC Pages: 8
Renault Lodgy 2017 Driver'S Handbook Manual preview
Lodgy 2017
Brand: Renault Pages: 238
Condor T-RAMP Quick Start Manual preview
T-RAMP
Brand: Condor Pages: 2
Cadillac 2009 CTS Personalization Manual preview
2009 CTS
Brand: Cadillac Pages: 20
AMP Research BEDXTENDER HD MAX 74841-00A Assembly Installation Manual preview
BEDXTENDER HD MAX 74841-00A
Brand: AMP Research Pages: 9
Belkin F8V7058-APL User Manual preview
F8V7058-APL
Brand: Belkin Pages: 2
Saab 9000 1985 Service Manual preview
9000 1985
Brand: Saab Pages: 92
A-rival PNC70 Active Hardware Manual preview
PNC70 Active
Brand: A-rival Pages: 23
Jaeger 12020523 Fitting Instructions Manual preview
12020523
Brand: Jaeger Pages: 11
Subaru 2003 Baja Owner'S Manual preview
2003 Baja
Brand: Subaru Pages: 32
Quadratec 11113.1435 Quick Start Manual preview
11113.1435
Brand: Quadratec Pages: 14
Prorack K577W Fitting Instructions Manual preview
K577W
Brand: Prorack Pages: 15
Honda 2007 Fit User Information preview
2007 Fit
Brand: Honda Pages: 24
Classic AutoAir Mustang 1969 Installation Manual preview
Mustang 1969
Brand: Classic AutoAir Pages: 44

Brands by name

Popular brands

Load more brands