MARUTI SUZUKI Ertiga Tour M Owner'S Manual Download Page 142

Page: 142 / 238

5-23

OTHER CONTROLS AND EQUIPMENT

72RH0-74E

NOTE:

• When “Bluetooth Power” is set to “OFF”,

the audio system disconnects from the

registered Bluetooth

device.

• If “Bluetooth Power” is set to “Off”, the

audio system will not automatically

reconnect the next time the ignition is

switched on.

The device status will be displayed

1) The Bluetooth

setting screen will be

displayed.

• From the panel button:

Touch the “SETUP” button (4).

Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Bluetooth”, and

touch the “ENT” button (2).

• From the steering switch:

Press the Bluetooth button (5).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Setup Blue-

tooth”, and touch the “ENT” button (2).

3) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Bluetooth

Info”, and touch the “ENT” button (2).

4) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select the desired sta-

tus, and touch the “ENT” button (2).

• To display the device name, select

“Device Name”.

• To display the device address, select

“Device Address”.

Initialize

It is possible to initialize the audio system's

Bluetooth

settings or device information.

1) The Bluetooth

setting screen will be

displayed.

• From the panel button:

Touch the “SETUP” button (4).

Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Bluetooth”, and

touch the “ENT” button (2).

• From the steering switch:

Press the Bluetooth button (5).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Setup Blue-

tooth”, and touch the “ENT” button (2).

3) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Initialize”, and

touch the “ENT” button (2).

4) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select the item that

you want to initialize item, and touch

the “ENT” button (2).

• HF Sound Setting:

– Reception/ringtone volume

– Incoming call volume

• Vehicle Device Info:

Passkey

• All Initialize:

– Reception/ringtone volume

– Incoming call volume

– Bluetooth audio volume

– Pairing registration

– Phonebook/history

– Speed dial

– Connect Method

– Bluetooth Power

– Auto Transfer

5) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “YES”, and

touch the “ENT” button (2).

CAUTION

• Do not initialize the settings while

driving. Stop your vehicle in a safe

area before initializing the device.

• Initialize with caution. Initialized

settings and history cannot be

restored.

Summary of Contents for Ertiga Tour M















































































































































































































































Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands