manualshive.com logo in svg

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

The MARUTI SUZUKI Ertiga Tour M Owner's Manual is the essential guide to maximize your experience with this multi-purpose vehicle. Easily download the manual for free from our website to access comprehensive information on its features, maintenance, and operation, ensuring a hassle-free ownership experience.

Share
Download
background image

6-20

INSPECTION AND MAINTENANCE

72RH0-74E

5) If continuous high speed driving is

required, increase pressure of tires by 5

psi over recommended inflation pres-

sure. 

6) Never run the tire beyond TWI (Tread

wear indicator). The tire is recom-

mended to be replaced when the

remaining tread has worn to this point.

The indicators are spaced across the

tread around the tire marked by a trian-

gular symbol (TWI).

7) Always prefer tubeless tire mounting

machine. In case of manual mounting

tire/ wheel rim damage may occur.

8) In case of any problem, please get in

touch with a Maruti Suzuki authorised

workshop.

Lead-acid Battery

69RM06006

For maintenance-free battery (cap-less

type), you need not add water. For tradi-

tional type battery, which has water filler

caps, the level of the battery fluid must be

kept between the “MAX” and the “MIN”

level lines at all times. You should periodi-

cally check the battery, battery terminals,

and battery hold-down bracket for corro-

sion. Remove corrosion using a stiff brush

and ammonia mixed with water, or baking

soda mixed with water. After removing cor-

rosion, rinse with clean water.
If your vehicle is not going to be driven for

a month or longer, disconnect the cable

from the negative terminal of the battery to

help prevent discharge.

WARNING

• Batteries produce flammable

hydrogen gas. Keep flames and

sparks away from the lead-acid bat-

tery or an explosion may occur.

Never smoke when working in the

vicinity of the lead-acid battery.

• When checking or servicing the

lead-acid battery, disconnect the

negative cable. Be careful not to

cause a short circuit by allowing

metal objects to contact the lead-

acid battery posts and the vehicle

at the same time.

• To avoid harm to yourself or dam-

age to your vehicle or lead-acid

battery, follow the jump starting

instructions in “EMERGENCY SER-

VICE” section of this manual if it is

necessary to jump-start your vehi-

cle.

• Diluted sulfuric acid spilled from

lead-acid battery can cause blind-

ness or severe burns. Use proper

eye protection and gloves. Flush

eyes or body with ample water and

get medical care immediately if suf-

fered. Keep batteries out of reach

of children.

EXAMPLE

MAX

 

 MIN

Summary of Contents for Ertiga Tour M















































































































































































































































Reviews:

No comments

Related manuals for Ertiga Tour M

AA Products X31 Instruction Manual preview
X31
Brand: AA Products Pages: 6
Saleen 10-8002-C11998B Installation Manual preview
10-8002-C11998B
Brand: Saleen Pages: 12
Buick 2013 Buick Verano Manual preview
2013 Buick Verano
Brand: Buick Pages: 5
Kolpin Outdoors 25-1080 Assembly & Owners Manual preview
25-1080
Brand: Kolpin Outdoors Pages: 6
Schartec CR 4 Manual preview
CR 4
Brand: Schartec Pages: 2
Calitop Calispace Ocean 80 Assembly Instructions preview
Calispace Ocean 80
Brand: Calitop Pages: 5
Fast Master Products SWIVELWHEEL-46 Assembly Instructions Manual preview
SWIVELWHEEL-46
Brand: Fast Master Products Pages: 13
AIS MAZMOD2 Manual preview
MAZMOD2
Brand: AIS Pages: 2
SSV Works RG4-DM3 Manual preview
RG4-DM3
Brand: SSV Works Pages: 2
Poison Spyder TrailGate TJ Installation Instructions preview
TrailGate TJ
Brand: Poison Spyder Pages: 5
iQOS CCU01 Safety Warnings And Instructions preview
CCU01
Brand: iQOS Pages: 4
Metra Electronics 99-9302 Installation Instructions Manual preview
99-9302
Brand: Metra Electronics Pages: 8
Whispbar K723W Fitting Instructions Manual preview
K723W
Brand: Whispbar Pages: 77
Masterbuilt Hitch-Haul 30110315 Operation Manual & Safety Instructions preview
Hitch-Haul 30110315
Brand: Masterbuilt Pages: 2
Gold Lantern GL-VTMK20 Specifications preview
GL-VTMK20
Brand: Gold Lantern Pages: 1
Metec 806255 Mounting Instructions preview
806255
Brand: Metec Pages: 2
Metra Electronics 99-7400 Installation Instructions Manual preview
99-7400
Brand: Metra Electronics Pages: 8
Macally HRMOUNTPROTRAY User Manual preview
HRMOUNTPROTRAY
Brand: Macally Pages: 19

Brands by name

Popular brands

Load more brands