manualshive.com logo in svg

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

The MARUTI SUZUKI Ertiga Tour M Owner's Manual is the essential guide to maximize your experience with this multi-purpose vehicle. Easily download the manual for free from our website to access comprehensive information on its features, maintenance, and operation, ensuring a hassle-free ownership experience.

Share
Download
background image

6-19

INSPECTION AND MAINTENANCE

72RH0-74E

Tire Rotation

5-tire rotation

80JK040

4-tire rotation

54G114

To avoid uneven wear of your tires and to

prolong their life, rotate the tires as illus-

trated. Tires should be rotated every 10000

km. After rotation, adjust front and rear tire

pressures to the specification listed in your

vehicle’s Tire Information Label.

Wheel Balancing

If the vehicle vibrates abnormally on

smooth road, have the wheel balanced at

Maruti Suzuki authorised workshop.

Wheel Alignment

In case of abnormal tire wear or pulling

towards one side, have the wheel aligned

at Maruti Suzuki authorised workshop. 

Tubeless Tires (If equipped)

The vehicle is equipped with Tubeless

Tires. In tubeless tire, a thin layer of butyl

rubber is used for lining the inside of the

tubeless tire. This layer is to prevent air

loss and fulfilling the purpose of tube. The

air pressure is maintained by the sealing

between tire bead and wheel rim. Tubeless

tires are having advantage of slow air loss

and preventing sudden deflation while driv-

ing. 

Care and maintenance tips for tubeless

tires

1) Always maintain recommended infla-

tion pressure. Driving continuously at

low inflation pressure can lead to tire

damage.

2) In case any leakage is found, check for

any nail penetration/valve core damage

or rim bent. Damaged wheel must not

be used. 

3) In case tire has run at low pressure, it

must be inspected for any defect.

4) Whenever new tire is fitted, replace the

valve. 

WARNING

• Your MARUTI SUZUKI vehicle is

equipped with tires which are all

the same type and size. This is

important to ensure proper steering

and handling of the vehicle. Never

mix tires of different size or type on

the four wheels of your vehicle. The

size and type of tires used should

be only those approved by MARUTI

SUZUKI as standard or optional

equipment for your vehicle.

• Replacing the wheels and tires

equipped on your vehicle with cer-

tain combinations of aftermarket

wheels and tires can significantly

change the steering and handling

characteristics of your vehicle.

• Therefore, use only those wheel

and tire combinations approved by

MARUTI SUZUKI as standard or

optional equipment for your vehi-

cle.

NOTICE

Replacing the original tires with tires

of a different size may result in false

speedometer or odometer readings.

Check with a Maruti Suzuki autho-

rised workshop before purchasing

replacement tires that differ in size

from the original tires.

EXAMPLE

EXAMPLE

Summary of Contents for Ertiga Tour M















































































































































































































































Reviews:

No comments

Related manuals for Ertiga Tour M

JAC S5 Workshop Manual preview
S5
Brand: JAC Pages: 70
Yakima SkyBox 12 Installation Instructions Manual preview
SkyBox 12
Brand: Yakima Pages: 6
Yakima HoldUp Plus2 Manual preview
HoldUp Plus2
Brand: Yakima Pages: 18
Inbay 241170-53-1 Installation Manual preview
241170-53-1
Brand: Inbay Pages: 20
Rostra RearSight 250-8308 Installation Instructions preview
RearSight 250-8308
Brand: Rostra Pages: 2
BMW FXX ATM Emulator User And Installation Manual preview
FXX ATM Emulator
Brand: BMW Pages: 5
Mont Blanc ACTIVA+ Assembly Instructions preview
ACTIVA+
Brand: Mont Blanc Pages: 2
ULTIMATE SPEED 290923 Operation And Safety Notes preview
290923
Brand: ULTIMATE SPEED Pages: 56
Cadillac 2000 DeVille Service Manual Addendum preview
2000 DeVille
Brand: Cadillac Pages: 19
Buick 1997 Park Avenue Manual preview
1997 Park Avenue
Brand: Buick Pages: 420
NanoCam Plus NANO CONNECT Smartview 72 Quick Start Manual preview
NANO CONNECT Smartview 72
Brand: NanoCam Plus Pages: 4
Fab Fours Z1550 Installation Manual preview
Z1550
Brand: Fab Fours Pages: 18
Mercedes-Benz 2012 A-Class Owner'S Manual preview
2012 A-Class
Brand: Mercedes-Benz Pages: 356
Mitsubishi 2015 OUTLANDER SPORT/RVR Owner'S Manual preview
2015 OUTLANDER SPORT/RVR
Brand: Mitsubishi Pages: 384
CEMO 4052886280348 Manual preview
4052886280348
Brand: CEMO Pages: 12
SSANGYONG ACTYON SPORTS Instruction preview
ACTYON SPORTS
Brand: SSANGYONG Pages: 14
Spyder Auto PRO-YD-DR02 Series Installation Manual preview
PRO-YD-DR02 Series
Brand: Spyder Auto Pages: 3
Motorola GMLN1040 User Manual preview
GMLN1040
Brand: Motorola Pages: 28

Brands by name

Popular brands

Load more brands