manualshive.com logo in svg

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

The MARUTI SUZUKI Ertiga Tour M Owner's Manual is the essential guide to maximize your experience with this multi-purpose vehicle. Easily download the manual for free from our website to access comprehensive information on its features, maintenance, and operation, ensuring a hassle-free ownership experience.

Share
Download
background image

3-16

OPERATING YOUR VEHICLE

72RH0-74E

54MN069

(1) ABS warning light

(2) Brake system warning light

WARNING

• On some types of loose surfaces

(such as gravel, snow-covered

roads, etc.), the stopping distance

required for a vehicle with ABS

may be slightly greater than the

one required for a comparable vehi-

cle with a conventional brake sys-

tem. With a conventional brake

system, skidding tires are able to

plow the gravel or snow layer,

shortening the stopping distance.

ABS minimizes this resistance

effect. Allow for extra stopping dis-

tance when driving on loose sur-

faces. 

• On regular paved roads, some driv-

ers may be able to obtain slightly

shorter stopping distances with

conventional brake systems than

with ABS.

• In both of the above conditions,

ABS will still offer the advantage of

helping you maintain directional

control. However, remember that

ABS will not compensate for bad

road or weather conditions or poor

driver judgment. Use good judg-

ment and do not drive too fast. 

(1)

(2)

EXAMPLE

WARNING

• If the ABS warning light (1) on the

instrument panel comes on and

stays on while driving, there may

be a problem with the ABS system.

Ask a Maruti Suzuki authorised

workshop to inspect the ABS sys-

tem immediately. If the ABS system

becomes inoperative, the brake

system will function as an ordinary

brake system that has no ABS.

• If the ABS warning light (1) and the

Brake system warning light (2) on

the instrument panel simultane-

ously stays on or comes on while

driving, both anti-lock function and

rear brake force control function

(proportioning valve function) of

the ABS system may have failed. If

so, the rear wheels may easily skid

or the vehicle can even spin in the

worst case when braking on a slip-

pery road or when hard braking

even on a dry paved road. Ask a

Maruti Suzuki authorised workshop

to inspect the ABS system immedi-

ately. Drive carefully, avoiding hard

braking as much as possible.

Summary of Contents for Ertiga Tour M















































































































































































































































Reviews:

No comments

Related manuals for Ertiga Tour M

Yakima Q46 Installation Instructions preview
Q46
Brand: Yakima Pages: 4
Rola LRSA2 Pack Contents & Fitting Instructions preview
LRSA2
Brand: Rola Pages: 3
BMW E46/2 Coupe Manual preview
E46/2 Coupe
Brand: BMW Pages: 55
Whispbar K496W Fitting Instructions Manual preview
K496W
Brand: Whispbar Pages: 15
Valeo Park Vision VAL632210 Instruction Manual preview
Park Vision VAL632210
Brand: Valeo Pages: 25
LXE Akerstroms Tx700 Configuration Manual preview
Akerstroms Tx700
Brand: LXE Pages: 146
Racelogic Speed & Route Profiler Manual preview
Speed & Route Profiler
Brand: Racelogic Pages: 24
Acura 08L07-TA1-203 Installation Instructions Manual preview
08L07-TA1-203
Brand: Acura Pages: 6
Scania Interlock 700 Series Instructions For Use Manual preview
Interlock 700 Series
Brand: Scania Pages: 82
BMW FXX ATM Emulator User And Installation Manual preview
FXX ATM Emulator
Brand: BMW Pages: 5
MBRP 0130717 Assembly preview
0130717
Brand: MBRP Pages: 5
SMART EQ forfour 2018 Owner'S Manual preview
EQ forfour 2018
Brand: SMART Pages: 224
DRAGONFIRE 11-0800 Installation Instructions preview
11-0800
Brand: DRAGONFIRE Pages: 4
VDO VIEWLINE TEMPERATURE GAUGES Product Information preview
VIEWLINE TEMPERATURE GAUGES
Brand: VDO Pages: 5
Bestop 51719 Installation Instructions Manual preview
51719
Brand: Bestop Pages: 14
Camcar Walmec 40102 Manual preview
Walmec 40102
Brand: Camcar Pages: 6
BMW 330e Touring xDrive G21 2021 Owner'S Handbook Manual preview
330e Touring xDrive G21 2021
Brand: BMW Pages: 102
P-Charge STAND-ALONE Operating Instructions Manual preview
STAND-ALONE
Brand: P-Charge Pages: 16

Brands by name

Popular brands

Load more brands