manualshive.com logo in svg

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

The MARUTI SUZUKI Ertiga Tour M Owner's Manual is the essential guide to maximize your experience with this multi-purpose vehicle. Easily download the manual for free from our website to access comprehensive information on its features, maintenance, and operation, ensuring a hassle-free ownership experience.

Share
Download
background image

7-9

EMERGENCY SERVICE

72RH0-74E

Towing your vehicle

If you need to have your vehicle towed,

contact a professional service, Maruti

Suzuki authorised workshop can provide

you with detailed towing instructions.

2-Wheel Drive (2WD) 

The vehicle may be towed using either of

the following methods.
1) From the front, with the front wheels

lifted and the rear wheels on the

ground. Before towing, make sure that

the parking brake is released.

2) From the rear, with the rear wheels

lifted and the front wheels on the

ground, provided the steering and

drivetrain are in operational condition.

Before towing, make sure that trans-

mission is in neutral, the steering wheel

is unlocked (the ignition key should be

in “ACC” position) and the steering

wheel is secured with a clamping

device designed for towing service.

Engine trouble: Starter does 
not operate

1) Try turning the ignition switch to

“START” position with the headlights

turned on to determine the lead-acid

battery condition. If the headlights go

excessively dim or go off, it usually

means that either the lead-acid battery

is discharged or the lead-acid battery

terminal contact is poor. Recharge the

lead-acid battery or correct lead-acid

battery terminal contact as necessary.

2) If the headlights remain bright, check

the fuses. If the reason for failure of the

starter is not obvious, there may be a

major electrical problem. Have the vehi-

cle inspected by a Maruti Suzuki autho-

rised workshop.

NOTICE

Observe the following instructions

when towing your vehicle.

• To help avoid damage to your vehi-

cle during towing, proper equip-

ment and towing procedures must

be used.

• Using the frame hook, tow your

vehicle on paved roads for short

distances at low speed.

NOTICE

The steering column is not strong

enough to withstand shocks trans-

mitted from the front wheels during

towing. Always unlock the steering

wheel before towing.

Summary of Contents for Ertiga Tour M















































































































































































































































Reviews:

No comments

Related manuals for Ertiga Tour M

Jeep Compass Overview Manual preview
Compass
Brand: Jeep Pages: 25
Carax HUD CRX-3001 Quick Start Manual preview
HUD CRX-3001
Brand: Carax Pages: 2
Blue Giant STRONGARM RVR303 Installation & Technical Manual preview
STRONGARM RVR303
Brand: Blue Giant Pages: 48
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
MASCOT SMARTCHARGER User Manual preview
SMARTCHARGER
Brand: MASCOT Pages: 12
Ford 2001 Explorer Owner'S Manual preview
2001 Explorer
Brand: Ford Pages: 256
RAM Ram 3500 2012 Specifications preview
Ram 3500 2012
Brand: RAM Pages: 13
TATA Motors Indigo LE Owner'S Manual & Service Book preview
Indigo LE
Brand: TATA Motors Pages: 151
Thule QUICKDRAW RACHET TIE-DOWNS 855 User Manual preview
QUICKDRAW RACHET TIE-DOWNS 855
Brand: Thule Pages: 3
Z Flash OBD-II STALK User Manual preview
OBD-II STALK
Brand: Z Flash Pages: 4
EUFAB 11512 Manual preview
11512
Brand: EUFAB Pages: 4
Carcomm CMPC-22 Fujitsu-Siemens PocketLoox 410 Installation Manual preview
CMPC-22 Fujitsu-Siemens PocketLoox 410
Brand: Carcomm Pages: 2
Brigade VBV-770-310 Quick Installation Manual preview
VBV-770-310
Brand: Brigade Pages: 12
v.link CI-VL2-PC-HSD Manual preview
CI-VL2-PC-HSD
Brand: v.link Pages: 19
Alfa Romeo Stelvio 2019 User Manual preview
Stelvio 2019
Brand: Alfa Romeo Pages: 268
RAM Truck 2500 2018 Supplement Manual preview
Truck 2500 2018
Brand: RAM Pages: 32
Buick 2004 Rainier Getting To Know Manual preview
2004 Rainier
Brand: Buick Pages: 20
GMC 2013 Terrain Owner'S Manual preview
2013 Terrain
Brand: GMC Pages: 364

Brands by name

Popular brands

Load more brands