manualshive.com logo in svg

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

The MARUTI SUZUKI Ertiga Tour M Owner's Manual is the essential guide to maximize your experience with this multi-purpose vehicle. Easily download the manual for free from our website to access comprehensive information on its features, maintenance, and operation, ensuring a hassle-free ownership experience.

Share
Download
background image

2-11

BEFORE DRIVING

72RH0-74E

The driver’s window has AUTO-DOWN

features for greater convenience (at toll

booths or drive-through restaurants, for

example). These features allow the driver

to open the window without holding the

window switch in DOWN position. Press

down the driver’s window switch com-

pletely and release it. To stop the window

before it reaches the FULL-DOWN posi-

tion, pull up the switch briefly.

Lock switch

73R0005

The driver’s door also has a lock switch for

the passenger’s windows. When you push

in the lock switch, the passenger’s win-

dows cannot be raised or lowered by oper-

ating any of the switches (2), (3), (4) or (5).

To restore normal operation, release the

lock switch by pushing again.

NOTE:

If you drive with one of the rear windows

open, you may hear a loud sound caused

by air vibration. To reduce the sound, open

the driver’s or front passenger’s window, or

narrow the rear window opening.

Mirrors

Inside Rearview Mirror

You can adjust the inside rearview mirror

by hand to see the rear of your vehicle in

the mirror. 

68LMT0205

68LMT0206

(2) Day driving

(3) Night driving

To adjust the mirror, set the selector tab (1)

to the day position, and then move the mir-

ror up, down or sideways by hand to obtain

the best view.

When driving at night, you can move the

selector tab to the night position to reduce

glare from the headlights of vehicles

behind you.

EXAMPLE

EXAMPLE

WARNING

• You should always lock the pas-

senger’s window operation when

there are children in the vehicle.

Children can be seriously injured if

they get part of their body caught

by the window during operation.

• To avoid injuring an occupant by

window entrapment, check that no

part of the occupant’s body such as

hands or head is in the path of the

power windows when closing

them.

• Always remove the ignition key and

take with you when leaving the

vehicle even only for a short time.

Also do not leave children alone in

a parked vehicle. Unattended chil-

dren could use the power window

switches and get trapped by the

window.

EXAMPLE

(1)

(2)

(3)

EXAMPLE

Summary of Contents for Ertiga Tour M















































































































































































































































Reviews:

No comments

Related manuals for Ertiga Tour M

Horn Tools HISDMSPTRA01 Mounting Instructions preview
HISDMSPTRA01
Brand: Horn Tools Pages: 6
Mini COOPER Owner'S Manual preview
COOPER
Brand: Mini Pages: 20
Right Weigh 221-SK Installation Manual preview
221-SK
Brand: Right Weigh Pages: 16
Mercedes-Benz 2016 SLK Operator'S Manual preview
2016 SLK
Brand: Mercedes-Benz Pages: 358
Lexus HS 250h Vehicle Dismantling Manual preview
HS 250h
Brand: Lexus Pages: 34
Toyota 86 2020 Quick Reference Manual preview
86 2020
Brand: Toyota Pages: 32
Columbia THERAPEDIC 2000 Instructions For Use Manual preview
THERAPEDIC 2000
Brand: Columbia Pages: 14
Honda 2006 Accord Owner'S Manual preview
2006 Accord
Brand: Honda Pages: 569
Ferve F-2024 Operating Instructions Manual preview
F-2024
Brand: Ferve Pages: 28
Oldsmobile 1994 88 Owner'S Manual preview
1994 88
Brand: Oldsmobile Pages: 276
Volkswagen PASSAT CC - Brochure preview
PASSAT CC -
Brand: Volkswagen Pages: 32
Lincoln 2017 MKC Owner'S Manual preview
2017 MKC
Brand: Lincoln Pages: 538
Chevrolet 1995 C/K Pickup Owner'S Manual preview
1995 C/K Pickup
Brand: Chevrolet Pages: 483
HOLDEN Malibu EM 2015 Owner'S Handbook Manual preview
Malibu EM 2015
Brand: HOLDEN Pages: 330
K&N Engineering Filtercharger 57-9004 Installation Manual preview
Filtercharger 57-9004
Brand: K&N Engineering Pages: 4
Honda Element 2004 Owner'S Manual preview
Element 2004
Brand: Honda Pages: 219
Volkswagen Passat 2011 Maintenance Manual preview
Passat 2011
Brand: Volkswagen Pages: 188
Pet Gear PG9050TN Instruction Manual preview
PG9050TN
Brand: Pet Gear Pages: 4

Brands by name

Popular brands

Load more brands