manualshive.com logo in svg

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

The MARUTI SUZUKI Ertiga Tour M Owner's Manual is the essential guide to maximize your experience with this multi-purpose vehicle. Easily download the manual for free from our website to access comprehensive information on its features, maintenance, and operation, ensuring a hassle-free ownership experience.

Share
Download
background image

5-8

OTHER CONTROLS AND EQUIPMENT

72RH0-74E

• If your vehicle has been left in the sun

with the windows closed, it will cool

faster if you open the windows briefly

while you operate the air conditioner with

the air intake selector at FRESH AIR and

the blower at high speed.

Dehumidifying

Set the air flow selector to a desired air

flow selector position, the temperature

selector to the desired temperature posi-

tion and the blower speed selector to the

desired blower speed position. Also select

FRESH AIR and turn on “A/C” switch.

NOTE:

Because the air conditioner dehumidifies

the air, turning it on will help keep the win-

dows clear, even when blowing heated air

using DEFROST or HEAT & DEFROST

functions.

72R0012

NOTE:

If you need maximum defrosting:

• select DEFROST and FRESH AIR, 

• set the blower speed selector to high, 

• adjust the temperature selector to the

hot end, 

• turn on “A/C” switch, and 

• adjust the side outlets so the air blows

on the side windows.

Maintenance

If you do not use the air conditioner for a

long period, such as during winter, it may

not give the best performance when you

start using it again. To help maintain opti-

mum performance and durability of your air

conditioner, it needs to be run periodically.

Operate the air conditioner at least once a

month for one minute with the engine

idling. This circulates the refrigerant and oil

and helps protect the internal components.
If your air conditioner is equipped with air

filters, clean or replace them as specified

in “Maintenance schedule” in “INSPEC-

TION AND MAINTENANCE” section. 

NOTE:

Your vehicle uses the air conditioning

refrigerant HFC-134a, commonly called

“R-134a”. R-134a replaced R-12 around

1993 for automotive applications. Other

refrigerants are available, including recy-

cled R-12, but only R-134a should be used

in your vehicle.

EXAMPLE

NOTICE

Using the wrong refrigerant may

damage your air conditioning sys-

tem. Use R-134a only. Do not mix or

replace the R-134a with other refrig-

erants.

Summary of Contents for Ertiga Tour M















































































































































































































































Reviews:

No comments

Related manuals for Ertiga Tour M

KC HiLiTES C Series Wiring Diagram preview
C Series
Brand: KC HiLiTES Pages: 4
BESAFE iZi Flex Manual preview
iZi Flex
Brand: BESAFE Pages: 4
K&M MILSCO KIT# C746700 Installation Manual preview
MILSCO KIT# C746700
Brand: K&M Pages: 2
Car-Interface CI-RL4-NAC12 Manual preview
CI-RL4-NAC12
Brand: Car-Interface Pages: 25
Thule 2 Bike Carrier 977 Instructions Manual preview
2 Bike Carrier 977
Brand: Thule Pages: 6
Dodge Dodge Challenger SRT8®Challenger SRT8 392 2012 Specifications preview
Dodge Challenger SRT8®Challenger SRT8 392 2012
Brand: Dodge Pages: 5
Edelbrock 65932 Installation Instructions preview
65932
Brand: Edelbrock Pages: 2
TATA Motors Sumo Victa EX Owner'S Manual & Service Book preview
Sumo Victa EX
Brand: TATA Motors Pages: 92
MULTILIFT ULTIMA S Installation Instructions Manual preview
ULTIMA S
Brand: MULTILIFT Pages: 62
Sanitas SMG 245 Instructions For Use Manual preview
SMG 245
Brand: Sanitas Pages: 36
GARO Wallbox GLB Quick Start Manual preview
Wallbox GLB
Brand: GARO Pages: 15
Volvo 1989 780 Owner'S Manual preview
1989 780
Brand: Volvo Pages: 123
Jaeger 12160509J Fitting Instructions Manual preview
12160509J
Brand: Jaeger Pages: 16
Hama 00173884 Operating Instructions Manual preview
00173884
Brand: Hama Pages: 13
Renault CAPTUR 2019 Vehicle Instruction Card preview
CAPTUR 2019
Brand: Renault Pages: 11
TATA Motors Indigo Marina Owner'S Manual & Service Book preview
Indigo Marina
Brand: TATA Motors Pages: 146
Westin 40-1245 Installation Instructions preview
40-1245
Brand: Westin Pages: 2
Vauxhall Antara 2014 Owner'S Manual preview
Antara 2014
Brand: Vauxhall Pages: 215

Brands by name

Popular brands

Load more brands