MARUTI SUZUKI Ertiga Tour M Owner'S Manual Download Page 70

Page: 70 / 238

2-35

BEFORE DRIVING

72RH0-74E

72R0142

NOTE:

The currently selected setting item is sur-

rounded by a frame.
NOTE:

• If you push and hold the indicator selec-

tor knob (3) to enter into the setting

mode when the display (B) shows aver-

age fuel consumption, average speed,

driving time, the value will be reset

simultaneously. If you do not want to

reset the value, push the indicator selec-

tor knob quickly to switch the indication

of the display.

• If you turn the ignition switch, press the

engine switch or start to move the vehi-

cle when the display is in the setting

mode, the setting mode will be canceled

automatically.

Distance unit

(Odometer / trip meter / driving range /

average speed distance unit setting)

You can change the units in which odome-

ter / trip meter / driving range / average

speed distance is displayed.

Fuel economy

(Fuel consumption unit setting)

You can change the units that fuel con-

sumption is displayed in.

Language

You can change the language of the infor-

mation display.

Fuel reset

(Average fuel consumption reset set-

ting)

You can change when the value of aver-

age fuel consumption is reset.

Temperature

(Temperature unit setting) (if equipped)

You can change the units that temperature

is displayed in.

• To change the temperature unit, select

“Temperature” in “Setting mode”. Then,

select “°C” or “°F”.

Clock setting

(Adjusting the clock)

• Adjust the clock by selecting “Clock set-

ting” in “Setting mode”. Then, select

“Adjust clock”.

• To change the hour indication, turn the

indicator selector knob (3) left or right

repeatedly when the hour indication

blinks. To change the hour indication

quickly, turn and hold the indicator selec-

tor knob (3). To set the hour indication,

push the indicator selector knob (3) and

the minute indication blinks.

• To change the minute indication, turn the

indicator selector knob (3) left or right

repeatedly when the minute indication

blinks. To change the minute indication

quickly, turn and hold the indicator selec-

tor knob (3). To set the minute indication,

push the indicator selector knob (3).

(Selecting 12H/24H format)

• Switch the time indication between 12-

hour and 24-hour format by selecting

“Clock setting” in “Setting mode”. Then,

select “12H” or “24H”.

(Adjusting the date)

• Adjust the date by selecting “Clock set-

ting” in “Setting mode”. Then select

“Adjust date”.

• To adjust year, month and day, operate

the indicator selector knob (3) in the

same way as adjusting the clock.

EXAMPLE

Summary of Contents for Ertiga Tour M















































































































































































































































Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands