MARUTI SUZUKI Ertiga Tour M Owner'S Manual Download Page 61

Page: 61 / 238

2-26

BEFORE DRIVING

72RH0-74E

When the ignition switch is turned “ON”,

the instrument panel lights come on.
Your vehicle has a system to automatically

dim the brightness of the instrument panel

lights when the position lights or headlights

are on.
You can adjust the meter illumination

brightness regardless of whether the posi-

tion lights or headlights are off or on.
To increase the brightness of the instru-

ment panel lights, turn the brightness con-

trol knob (1) clockwise.
To reduce the brightness of the instrument

panel lights, turn the brightness control

knob (1) counterclockwise.

NOTE:

• If you do not turn the brightness control

knob within several seconds of activat-

ing, the brightness control display will be

canceled automatically.

• When you reconnect the lead-acid bat-

tery, the brightness of the instrument

panel lights will be reinitialized. Readjust

the brightness according to your prefer-

ence.

NOTE:

If you adjust to the maximum brightness

level when the position lights or headlights

are on, the following functions will be can-

celled.

• The function which automatically dims

the brightness of instrument panel lights.

• The function which operates with the

brightness control, except maximum

brightness level.

Information Display

The information display is shown when the

ignition switch is in “ON” position.

72RM02011

(1) Information display

72R0062

WARNING

Do not adjust the brightness of the

instrument panel lights while driving.

Otherwise, you could lose control of

the vehicle.

(D)

(E)

(A)

(B)

(C)

(1)

EXAMPLE

(2)

(3)

EXAMPLE

Summary of Contents for Ertiga Tour M















































































































































































































































Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands