MARUTI SUZUKI Ertiga Tour M Owner'S Manual Download Page 143

Page: 143 / 238

5-24

OTHER CONTROLS AND EQUIPMENT

72RH0-74E

Notes on Bluetooth

73R0209

• The Bluetooth

word mark and logos are

registered trademarks owned by Blue-

tooth SIG, Inc. and any use of such

marks by Denso Ten Limited is under

license. Other trademarks and trade

names are those of their respective own-

ers.

This telecommunication equipment con-

forms to the requirements of the National

Telecommunications Commission.

• Stop using this unit and a Bluetooth

ready device whenever requested.

This unit shares the communication fre-

quency with other private or public wire-

less communication equipment such as

a wireless LAN and other wireless com-

munication radios.

You should stop using this unit immedi-

ately whenever you are notified that your

unit disturbs other wireless communica-

tion.

Profile

• SSP (Secure Simple Pairing)

• PBAP (Phone Book Access Profile)

• OPP (Object Push Profile)

• HFP (Hand-Free Profile)

• A2DP (Advanced Audio Distribution Pro-

file)

• AVRCP (Audio/Video Remote Control

Profile)

Disclaimer for Bluetooth

function

• Depending on the mobile phone models,

some phones may not be compatible

fully or partially (some function may be

restricted).

• Media playback through third-party

applications may have limited support.

• Playback, display contents, connectivity

or voice quality etc. may get affected

depending on circumstances.

• After the ignition switch is turned to the

“ON” position, the audio system takes

few seconds to detect and connect to

the Bluetooth

device (if already paired).

• Make sure that you are aware of all

applicable local laws and accordingly

use Bluetooth

device.

Bluetooth

hands-free (if equipped)

To use Bluetooth

devices (Bluetooth

audio or mobile phone) on the audio sys-

tem, it is required to register the Blue-

tooth

devices to the audio system by

“Bluetooth Settings”.

73R0150

Display

73R0151

EXAMPLE

(1)

(4)
(3)

(2)

(5)

(6)

EXAMPLE

Summary of Contents for Ertiga Tour M















































































































































































































































Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands