MARUTI SUZUKI Ertiga Tour M Owner'S Manual Download Page 149

Page: 149 / 238

5-30

OTHER CONTROLS AND EQUIPMENT

72RH0-74E

Display

73R0154

(A) Playback time

(B) Text information display

NOTE:

Some functions may not be usable on

some Bluetooth

devices.

Selecting the Bluetooth

audio

1) Press the “MEDIA” button (6) for 1 sec-

ond or more for changing from radio

mode, or

Touch the “MEDIA” button (6) if the

audio is in other than radio mode.

• Touch the “MEDIA” button (6). Each time

the button is touched, the mode will

change as follows:

USB (iPod

) (if equipped)

→

Bluetooth

audio (if equipped)

→

AUX (if equipped)

Fast forwarding/Rewinding a track

1) Hold down the “TUNE/TRACK” Up/

Down button (1).

•

: Hold down the Up button for 1 sec-

ond or longer to fast forward the track.

•

: Hold down the Down button for 1

second or longer to fast rewind the track.

• Releasing the button can stop the fast

forwarding/rewinding.

Selecting a track

1) Touch the “TUNE/TRACK” Up/Down

button (1).

•

: Touch the Up button to listen to the

next track.

•

: When the Down button is touched

once, the track currently being played

will start from the beginning again. Touch

the Down button twice to listen to the

previous track.

Selecting a group (only for supported

models)

1) Touch the “FLD” (group operation) but-

ton (4).

2) Touch the “TUNE/TRACK” Up/Down

button (1).

•

: Touch the Up button to go to the

next group.

•

: Touch the Down button to go to the

previous group.

Repeat playback

1) Touch the “SETUP” (random/repeat)

button (5).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Repeat”, and

touch the “DISP/ENT” button (2).

• Each time the “DISP/ENT” button (2) is

touched, display will change as follows:

Off

→

One song repeat

→

Group repeat (if available) ...

Random playback

1) Touch the “SETUP” (random/repeat)

button (5).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (1), select “Random”, and

touch the “DISP/ENT” button (2)

• Each time the “DISP/ENT” button (2) is

touched, display will change as follows:

Off

→

Group random

→

All random ...

Display change

1) Touch the “DISP/ENT” button (2).

• Each time the button is touched, display

will change as follows:

Artist name/Track title

→

Album name/

Track title ...

NOTE:

• “NO TITLE” will be displayed when there

is no text information in the USB device

currently being played.

• “...” is displayed if all text data cannot be

displayed. Touch and hold the “DISP/

ENT” button (2) for at least one second

to automatically display the rest of the

text data.

(A)

(B)

EXAMPLE

Summary of Contents for Ertiga Tour M















































































































































































































































Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands