1-19
72RH0-74E
Installation with lap-shoulder seat
belts
NOTE:
Stow the removed head restraint in the lug-
gage compartment so it will not cause
inconvenience to the occupants.
ELR type belt
80JC021
Install your child restraint system accord-
ing to the instructions provided by the child
restraint system manufacturer.
Check that the seat belt is securely
latched.
Move the child restraint system in all direc-
tions to check that it is securely installed.
When you put your child in the child
restraint system, appropriately slide the
front seat forward not to touch a part of
your child’s body.
Installation with ISOFIX type
anchorages
72R0029
Your vehicle is equipped with the lower
anchorages in the 2nd row seat outboard
seating positions for securing a ISOFIX
type of child restraints with the connecting
bars. The lower anchorages are located
where the rear of the seat cushion meets
the bottom of the seatback.
Install the ISOFIX type child restraint sys-
tem according to the instructions provided
by the child restraint system manufacturer.
After installation, try moving the child
CAUTION
If your vehicle is equipped with the
rear head restraint, adjust the height
of the head restraint or remove it for
fitting the child restraint, as neces-
sary. However, if a booster cushion
not equipped with the seatback is fit-
ted, the seat head restraint should
not be removed. If the head restraint
is removed for fitting the child
restraint, you need to install it again
after removing the child restraint.
If the child restraint is fitted improp-
erly, a child sitting in it could be
injured in a collision.
EXAMPLE
WARNING
Install the ISOFIX type of child
restraint(s) in the only outboard seat-
ing positions, not in the central posi-
tion for the 2nd row seat.
EXAMPLE