manualshive.com logo in svg

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

The MARUTI SUZUKI Ertiga Tour M Owner's Manual is the essential guide to maximize your experience with this multi-purpose vehicle. Easily download the manual for free from our website to access comprehensive information on its features, maintenance, and operation, ensuring a hassle-free ownership experience.

Share
Download
background image

1-21

FOR SAFE DRIVING

72RH0-74E

2) Use your hands to carefully align the

connecting bar tips with the anchor-

ages. Take care not to pinch your fin-

gers.

54G184

3) Push the child restraint toward the anchor-

ages so that the connecting bar tips are

partially hooked to the anchorages. Use

your hands to confirm the position.

54G185

4) Grasp the front of the child restraint and

push the child restraint forcefully to

latch the connecting bars. Check that

they are securely latched by trying to

move the child restraint system in all

directions, especially forward.

5) Attach the top tether strap referring to

“Installation of child restraint with top

tether” section.

When you put your child in the child

restraint system, appropriately slide the

front seat forward not to touch a part of

your child’s body.

Installation of child restraint with 

top tether

NOTE:

Stow the removed head restraint in the lug-

gage compartment so it will not cause

inconvenience to the occupants.

EXAMPLE

NOTICE

When installing a child restraint sys-

tem to the 2nd row seat, slide the

seat installed the child restraint sys-

tem as far back as possible.

EXAMPLE

CAUTION

If your vehicle is equipped with the

rear head restraint, adjust the height

of the rear head restraint or remove it

for fitting the child restraint, as nec-

essary. However, if a booster cushion

not equipped with the seatback is fit-

ted, the 2nd row seat head restraint

should not be removed. If the rear

head restraint is removed for fitting

the child restraint, you need to install

it again after removing the child

restraint.

If the child restraint is fitted improp-

erly, a child sitting in it could be

injured in a collision.

Summary of Contents for Ertiga Tour M















































































































































































































































Reviews:

No comments

Related manuals for Ertiga Tour M

Wagan 2591 User Manual preview
2591
Brand: Wagan Pages: 12
KAP AUDI 4G HIGHEND Manual preview
AUDI 4G HIGHEND
Brand: KAP Pages: 20
Horn Tools HISDMSPTRA01 Mounting Instructions preview
HISDMSPTRA01
Brand: Horn Tools Pages: 6
Doug Thorley Headers THY-464-1 Instructions preview
THY-464-1
Brand: Doug Thorley Headers Pages: 5
Edelbrock 66002 Installation Instructions preview
66002
Brand: Edelbrock Pages: 2
Chariot Carriers 51100913 Instruction Manual preview
51100913
Brand: Chariot Carriers Pages: 3
B-Speech Sima User Manual preview
Sima
Brand: B-Speech Pages: 4
Dakota Digital MCL-7000 Series Quick Start Manual preview
MCL-7000 Series
Brand: Dakota Digital Pages: 2
Volvo 2010 C30 Owner'S Manual preview
2010 C30
Brand: Volvo Pages: 284
Veigel S47290920 Installation And Operating Instructions Manual preview
S47290920
Brand: Veigel Pages: 24
Cellular Line interphone Instruction Manual preview
interphone
Brand: Cellular Line Pages: 25
AddSecure Asset Light Installation Manual preview
Asset Light
Brand: AddSecure Pages: 14
Whispbar K951W Fitting Instructions For Basic Carrier preview
K951W
Brand: Whispbar Pages: 15
Cadillac 2003 Seville Owner'S Manual preview
2003 Seville
Brand: Cadillac Pages: 402
Cobra BAK R294 Manual preview
BAK R294
Brand: Cobra Pages: 2
ConWys AG 21500598C VW Fitting Instructions Manual preview
21500598C VW
Brand: ConWys AG Pages: 16
Tabernus Peram Hatch-bag Luggage System Installation Instructions Manual preview
Hatch-bag Luggage System
Brand: Tabernus Peram Pages: 10
Mercedes-Benz CLS 2015 Operator'S Manual preview
CLS 2015
Brand: Mercedes-Benz Pages: 398

Brands by name

Popular brands

Load more brands