MARUTI SUZUKI Ertiga Tour M Owner'S Manual Download Page 8

Page: 8 / 238

1-5

FOR SAFE DRIVING

72RH0-74E

The walk-in type seat can be moved to

provide easy entry to and exit from the 3rd

row seats. You can move a walk-in seat by

lifting up the release lever and pushing the

seatback forward.

Head Restraints

Head restraints are designed to help

reduce the risk of neck injuries in the case

of an accident.

NOTE:

It may be necessary to fold forward the

seatback to provide enough overhead

clearance to remove the head restraint.

Adjust the head restraint to the position

which places the center of the head

restraint closest to the top of your ears. If

this is not possible for very tall passengers,

adjust the head restraint as high as possi-

ble.

2nd row seats

72R0134

3rd row seats

73R0040

WARNING

• After using the walk-in function, be

sure to return the folded seat back

to an upright position.

• Before returning a walk-in seat to

its normal seating position, make

sure that the feet of the passenger

in the 3rd row seat are out of the

way.

• After returning the seat to its nor-

mal seating position, make sure it

is securely latched.

NOTICE

Release lever is meant for easy entry

purpose only. Not to be used for

adjusting seatback.

WARNING

• Never drive the vehicle with the

head restraints removed.

• Do not attempt to adjust the head

restraint while driving.

EXAMPLE

Summary of Contents for Ertiga Tour M















































































































































































































































Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands