MARUTI SUZUKI Ertiga Tour M Owner'S Manual Download Page 130

Page: 130 / 238

5-11

OTHER CONTROLS AND EQUIPMENT

72RH0-74E

Functions available with the slide touch operation

Adjusting the volume

Touch or slide the “VOLUME” button (6).

• To increase the volume, touch

or slide upwards.

• To decrease the volume, touch or slide downwards.

NOTE:
While driving, adjust the volume to an extent that sound and/or noise coming from outside
can be heard

Mode

Function

Common

Volume up/down

–

Item selection

–

Radio

TUNE up/down

–

USB

File up/down

–

Folder up/down (folder operation mode)

–

iPod

TRACK up/down

–

Category selection (iPod

menu)

–

Bluetooth

audio

TRACK up/down

–

Group up/down (Group operation mode)

–

Hands-free

Reception/ringtone/incoming call volume

up/down

–

Switching pages of the speed dial selec-

tion screen

–

Sound settings

1) Touch the “SETUP” button (5).

•Touch for 1 second or longer when

using radio mode.

2) Touch or slide the “TUNE/TRACK” Up/

Down button (2), select “Sound”, and

touch the “ENT” button (3).

•The sound setting screen will be dis-

played.

3) Touch or slide the “TUNE/TRACK” Up/

Down button (2), select the desired

item, and touch the “ENT” button (3).

•The sound settings will change as fol-

lows:

•EQ

↔

Bass

↔

Treble

↔

Balance

↔

Fader

↔

AVC

Preset EQ

The preset EQ can set various types of

sounds depending on the type of music.

1) Touch or slide the “TUNE/TRACK” Up/

Down button (2) from the “Sound”

screen, select “EQ”, and touch the

“ENT” button (3).

2) Touch or slide the “TUNE/TRACK” Up/

Down button (2), select the desired

item, and touch the “ENT” button (3).

• The preset EQ settings will change as

follows:

Off (Flat)

↔

Jazz

↔

Rock

↔

Pop

↔

Classic

↔

Hip-hop

Summary of Contents for Ertiga Tour M















































































































































































































































Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands

MARUTI SUZUKI Ertiga Tour M, Owner'S Manual

Search results

Summary of Contents for Ertiga Tour M

Reviews:

Related manuals for Ertiga Tour M

Brands by name

Popular brands