Martin Professional Maxxyz, User Manual

Page: 71 / 160

The Programmer Window 71
The screen shot below shows all of these features in use.
You can see at a glance that fixture 56, a MAC 2k Profile in 16-bit mode, is selected and changes
have been made to its position and gobo attributes. You can also see that the pan/tilt of all the
odd 2k’s are set to the Preset “2k Guitar” while the evens are set to “2k Drummer.” The intensity
of all the 2k’s is varying. An intensity fade time of 5 seconds is also indicated and we can see that
the even fixtures are in open white while the odd fixtures are running a pan/tilt effect.
L
OADING
F
IXTURES INTO THE
P
ROGRAMMER
There are three ways to load information into the programmer:
1 Selecting a fixture or fixtures as described above
2 Using the “Edit” key from the keypad to edit cues
3 Using the “Load” key from the keypad to load groups, attribute groups or individual attributes.
L
O A D I N G T H E
P
R O G R A M M E R
U
S I N G
F
I X T U R E
S
E L E C T I O N
As noted earlier, this is an automatic function of the Maxxyz console. Whenever you select a
fixture and adjust one or more of its attributes, it is loaded into the programmer. Please note that
only those attributes that are adjusted are loaded.